Explosive Devices

JRC offers a wide range of explosive components for oil & gas and ordinance disposal.

Products include shaped charges, tubing & casing cutters, drill collar severing tools and drill pipe cutters. RF-safe detonators, detonating cord, and low-cost resistive detonators are also available.

For ordinance disposal, JRC offers cost-effective solutions in a wide variety of sizes and explosive gram weights.

Resources

Explosive Devices

Filter By

Expand AllРаскрыть Collapse AllСкрыть

Количество записей на странице Show results per page

MMYY	TitleНазвание	DateДата	Actual Date	Sort - Creation Date	Sort - Publish Date	Sort - Modify Date
	EX2009100297 U.S. DOT - Classification of explosives.		2011-12-09T00:00:00.000-06:00	2011-12-09T00:00:00.000-06:00	2018-03-16T07:00:44.442-05:00	2011-12-09T00:00:00.000-06:00
	KIT, EXPLOSIVE & HARDWARE, CUTTER, SEGMENTED, 5.5 IN OD, HMX, 275.5G 101951863 - KIT\| EXPLOSIVE & HARDWARE\| CUTTER\| SEGMENTED\| 5.5 IN OD\| HMX\| 275.5G		2017-10-06T00:00:00.000-06:00	2017-10-06T00:00:00.000-06:00	2018-03-16T07:00:31.847-05:00	2017-10-06T00:00:00.000-06:00
	5.000" Tubing 4.000" OD Cutter Part No.: 101978737_9Kpsi/400°F_1.4D UN0352_Segmented		2017-10-06T01:00:00.000-05:00	2017-10-06T01:00:00.000-05:00	2018-03-16T07:00:07.568-05:00	2017-10-06T01:00:00.000-05:00
	EX1996080028 U.S. DOT - Classification of explosives. EX1996080028		2011-11-09T00:00:00.000-06:00	2011-11-09T00:00:00.000-06:00	2018-03-16T07:00:44.442-05:00	2011-11-09T00:00:00.000-06:00
	Detonator Cord - Jet Research Detonator Cord in action		2017-03-14T00:00:00.000-05:00	2017-03-14T00:00:00.000-05:00		2017-03-14T01:00:00.000-05:00
	3.375 In, HMX, DOMINATOR® 25 G Shaped Charge Part No.: 101309223 - Shaped charge for oilfield use		2018-04-06T11:48:31.963-05:00	2018-04-06T11:48:31.963-05:00		2018-04-06T11:48:31.963-05:00
	4.5 in 12 SPF MILLENNIUM® HMX SDP 22.7g Shaped Charge Part No.: 101210674 - Shaped charge for oilfield use		2018-04-06T11:48:31.896-05:00	2018-04-06T11:48:31.896-05:00		2018-04-06T11:48:31.896-05:00
	1.687 In Dyna-Star® RDX 12.5 g Capsule Shaped Charge 1.687 In Dyna-Star® RDX\| 12.5 g\| Capsule Shaped Charge for oilfield use		2018-04-06T11:48:31.764-05:00	2018-04-06T11:48:31.764-05:00		2018-04-06T11:48:31.764-05:00
	Drill Collar Severing Tool Field Loading Procedure The Following Field Loading Instructions for Drill Collar Severing Tools Must be Explicitly Followed\| Without Attempts to Shortcut\| Alter\| Switch or Otherwise Deviate In Any Way\| or Use Alternate Parts From Those Intended to be Supplied by Jet Research		2015-05-11T01:00:00.000-05:00	2015-05-11T01:00:00.000-05:00		2015-05-11T01:00:00.000-05:00
	Wireline Setting Tools Jet Research Center (JRC) offers a comprehensive family of setting tools that provide industry-trusted reliability for deployment and setting of conventional wellbore devices.		2018-01-01T09:27:00.000-06:00	2018-01-01T09:27:00.000-06:00		2018-06-11T09:28:06.680-05:00
	Shaped Charge Jet Perforators Performance Summary Charge Performance data summary		2018-07-31T08:54:00.000-05:00	2018-07-31T08:54:00.000-05:00		2018-07-31T08:56:15.371-05:00
	Shaped Charge Jet Perforators Performance Summary Listing of shaped charges		2018-07-01T00:00:00.000-05:00	2018-07-01T00:00:00.000-05:00		2018-08-10T10:21:00.499-05:00
	EX1983080594 U.S. DOT - Classification of explosives. EX1983080594		2011-11-09T00:00:00.000-06:00	2011-11-09T00:00:00.000-06:00		2011-11-09T00:00:00.000-06:00
	MaxForce®-FRAC Perforating Suite of Charges The Jet Research Center portfolio of MaxForce®-FRAC charges delivers superior consistent holes by providing reduced variance from shot to shot, regardless of fluid clearance and decentralization.		2018-12-21T09:10:00.000-06:00	2018-12-21T09:10:00.000-06:00		2018-06-08T13:09:49.237-05:00
	80 HMX LS ZYTEL Detotec - Tubing or wireline conveyed perforating systems subjected to time and temperature exposure (see graph).		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	80 HMX LS XHV detotec - Special process Detotec 80 HMX PERFACORD® designed for use in "High Shot Density" perforating systems where charge interference may be of concern.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	80 RDX NYLON PERFACORD DETOTEC - Primarily for use in wireline conveyed perforating systems to be employed at time and temperature (see graph).		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	80 RDX LS detotec - Tubing or wireline conveyed perforating systems to be employed at time and temperature (see graph) where explosive component interfaces may be affected.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	80 RDX LS XHV detotec - A higher velocity RDX PERFACORD® for use in high shot density perforating systems where charge interference may be a factor.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	Tubing Cutters Field Loading Procedures The JRC explosive jet cutters contain explosive compounds which are designed to explode when they receive\| intentionally or unintentionally\| stimuli capable of bringing the explosive compounds to detonation.		2011-03-30T01:00:00.000-05:00	2011-03-30T01:00:00.000-05:00		2011-03-30T01:00:00.000-05:00
	Casing Cutters Field Loading Procedures The JRC explosive jet cutters contain explosive compounds which are designed to explode when they receive\| intentionally or unintentionally\| stimuli capable of bringing the explosive compounds to detonation.		2011-03-30T01:00:00.000-05:00	2011-03-30T01:00:00.000-05:00		2011-03-30T01:00:00.000-05:00
	Coiled Tubing and Small Tubing Cutter Loading Procedures The JRC explosive jet cutters for coiled tubing and small tubing contain explosive compounds which are designed to explode when they receive\| intentionally or unintentionally\| stimuli capable of bringing the explosive compounds to detonation.		2011-03-30T01:00:00.000-05:00	2011-03-30T01:00:00.000-05:00		2011-03-30T01:00:00.000-05:00
	Segmented Explosive Jet Cutters The Following Field Loading Instructions for Segmented Casing Cutter Tools Must be Explicitly Followed\| Without Attempts to Shortcut\| Alter\| Switch or Otherwise Deviate In Any Way\| or Use Alterate Parts From Those Intended to be Supplied by Jet Research Center for Such Field Assembly.		2017-08-03T01:00:00.000-05:00	2017-08-03T01:00:00.000-05:00		2017-08-03T01:00:00.000-05:00
	Drill Pipe Cutters Field Loading Procedures The JRC explosive jet cutters contain explosive compounds which are designed to explode when they receive\| intentionally or unintentionally\| stimuli capable of bringing the explosive compounds to detonation.		2011-03-30T01:00:00.000-05:00	2011-03-30T01:00:00.000-05:00		2011-03-30T01:00:00.000-05:00
	Electric Detonators Detonator.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	PRESSED PELLETS OF HMX CE CERTIFICATE ENB/B/022 PRESSED PELLETS OF HMX		2011-09-12T01:00:00.000-05:00	2011-09-12T01:00:00.000-05:00		2011-09-12T01:00:00.000-05:00
	Segmented Casing Cutters Shaped charge.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	Tubing Cutters Shaped charge.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	Tubing Cutters-HMX High (Blasting) explosive.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	Rig Environment Detonators RED Detonator CE MARK		2012-03-07T00:00:00.000-06:00	2012-03-07T00:00:00.000-06:00		2012-03-07T00:00:00.000-06:00
	HNS Cord PT 250 Detonating cord.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	CE Type 1502 Shaped charge.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	Non-Electric Detonators-NONA Detonator.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	BI Directional Booster Z 909 Detonating booster.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	RDX Capsule Charges High (Blasting) explosive.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	HNS Mild Detonating Fuze Assemblies Detonating cord.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	HMX (LX-tO) Cartridges High (Blasting) explosive.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	Charge Casing & Drill Pipe Cutters-HMX High (Blasting) explosive.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	Perfacord 80 HMX LS XHV Detonating cord.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	Non-Electric Detonators-HMX CE CERTIFICATE ENB/D/048 for Detonator. NON ELECTRIC DETONATORS\| HMX		2013-11-25T00:00:00.000-06:00	2013-11-25T00:00:00.000-06:00		2013-11-25T00:00:00.000-06:00
	HMX Booster Rods High (Blasting) explosive.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	Non-Electric Detonators and Boosters-HNX Detonator.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	HMX Capsule Charges High (Blasting) explosive.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	4-5/8" OMNI 12 SPF HMX SUPER HOLE Part No.: 100156995		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	3-3/8" OMNI 12 SPF RDX BH Part No.: 100008251		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	3-3/8" 6 SPF RDX DP Part No.: 100005333		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	2-3/4" MILLENNIUM 15 GRAM HMX Part No.: 101233817		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	1-9/16" MILLENNIUM Part No.: 100157028		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	4" MILLENNIUM HMX SUPER DP 4SPF Part No.: 101210636		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	2-1/8" MILLENNIUM DEEP STAR HMX SUPER DP Part No.: 101210198		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	7" MIRAGE 12/14 SPF SH/LD (TWISTLOCK) Part No.: 101228037		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	7" 12 SPF SH/LD (TWISTLOCK) Part No.: 101212693		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	1-9/16" 4 SPF HMX SUPER DP Part No.: 100157028		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	390 MaxForce for 4-5/8" Gun Part No. 102054947		2013-11-25T00:00:00.000-06:00	2013-11-25T00:00:00.000-06:00		2013-11-25T00:00:00.000-06:00
	4" MILLENNIUM HMX SUPER DP 5SPF Part No.: 101210636		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	4" DP HNS 4SPF Part No.: 101287306		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	6-1/2" MIRAGE 47 GRAM RDX BH Part No.: 101304878		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	4.625 Millennium II Part No. 101702911		2014-07-10T01:00:00.000-05:00	2014-07-10T01:00:00.000-05:00		2014-07-10T01:00:00.000-05:00
	175 MaxForce for 4-5/8" Gun Part No. 101826652		2013-11-25T00:00:00.000-06:00	2013-11-25T00:00:00.000-06:00		2013-11-25T00:00:00.000-06:00
	7" 12/14 SPF RDX SH Part No.: 101213474		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	4-5/8" OMNI 12 SPF RDX SUPER HOLE Part No.: 100005311		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	3-1/8" HMX MILLENNIUM Part No.:101366678		2012-09-28T01:00:00.000-05:00	2012-09-28T01:00:00.000-05:00		2012-09-28T01:00:00.000-05:00
	4-5/8" OMNI RDX BH/LD Part No.: 100005326		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	2-1/8" MILLENNIUM DEEP STAR Part No.: 101210198		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	2-1/8" DYNA-STAR 6 SPF RDX DP Part No.: 100005448		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	3-3/8" MILLENNIUM 6 SPF HMX SUPER DP Part No.: 101233819		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	4-5/8" OMNI 12 SPF RDX BH Part No.: 100005319		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	3-3/8" HNS MILLENNIUM Part No.: 101365876		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	4*-1/2" MILLENNIUM Part No.: 101210674		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	4-5/8" 6 SPF RDX DP Part No.: 100005322		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	1-11/16" DYNA-STAR 6 SPF RDX DP Part No.: 100005450 - 1-11/16" DYNA-STAR 6 SPF RDX DP		2012-01-24T00:00:00.000-06:00	2012-01-24T00:00:00.000-06:00		2012-01-24T00:00:00.000-06:00
	4" MILLENNIUM Part No.: 101210636		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	2-3/4" MILLENNIUM 6 SPF HMX Part No.: 101233817		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	7" MILLENNIUM 12SPF HMX Part No.: 101207997		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	6-1/2" MIRAGE 47 GRAM BH Part No.: 101304878		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	4" HNS DP 5SPF Part No.: 101287306		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	2-3/4" MILLENNIUM 15 GRAM HMX Part No.: 101233817		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	7" 14 SPF RDX SUPER HOLE Part No.: 101206796		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	3-3/8" 6 SPF HMX SDP Part No.: 100008249		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	2-3/4" 6 SPF RDX SUPER HOLE Part No.: 101206793		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	4-5/8" OMNI 12 SPF RDX SUPER HOLE Part No.: 100005311		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	2 1/8 DYNA-STAR 0 DEG PH 4SPF RDX DP PART NO. 100005448 - 2 1/8 DYNA-STAR 0 DEG PH 4SPF RDX DP		2012-03-07T00:00:00.000-06:00	2012-03-07T00:00:00.000-06:00		2012-03-07T00:00:00.000-06:00
	4-5/8" 18 SPF RDX BH Part No.: 100156990		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	5" OMNI 12 SPF RDX SUPER HOLE (7" CASING) Part No.: 100005311		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	2" 6 SPF HMX BH Part No.: 101206246		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	2" MILLENNIUM 6 SPF HMX Part No.: 101208224		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	2" MAXFORCE 6SPF HMX Part No: 101603801 - 7"		2012-01-09T00:00:00.000-06:00	2012-01-09T00:00:00.000-06:00		2012-01-09T00:00:00.000-06:00
	6-1/2" MIRAGE 12/14 SPF RDX BH HEAVY WALL Part No.: 101304878		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	4-5/8" 12 SPF HMX SH/LD Part No.: 101233690		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	2-3/4" 6 SPF HMX BH Part No.: 101270158		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	5" 21 SPF BH RDX Part No.: 101292616		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	7" 14 SPF RDX SUPER HOLE Part No.: 101206796/101213474		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	5" MIRAGE 32 GRAM RDX SH Part No.: 101307494		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	1-11/16" DYNA-STAR 6 SPF RDX DP Part No.: 100005450		2011-08-11T01:00:00.000-05:00	2011-08-11T01:00:00.000-05:00		2011-08-11T01:00:00.000-05:00
	4.625 in. OMNIHMX DP/LD Shaped Charge Part No.: 100005340 - Shaped charge for oilfield use.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	2.875" Tubing 2.125" OD cutter Part No.: 101290402_12.5Kpsi/400°F_1.4D UN0440		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	3.125 in. GSC RDX DP Shaped Charge Part No.: 101410556 - Shaped charge for oilfield use		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	6.625" - 7.000" Tubing 5.500" OD Cutter Part No.: 101951863_9Kpsi/400°F_1.4D UN0352_Segmented		2011-11-07T00:00:00.000-06:00	2011-11-07T00:00:00.000-06:00		2011-11-07T00:00:00.000-06:00
	2.50 In 6SPF Millennium™II HMX Shaped Charge Part No.: 101418095 - Shaped charge for oilfield use		2012-07-06T01:00:00.000-05:00	2012-07-06T01:00:00.000-05:00		2012-07-06T01:00:00.000-05:00
	Electronic Igniter DYNAWELL For Setting Tool DYNAenergetics - Part No.: 2465201 - RF-SAFE\| Temperature resistant igniter for oilfield use.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	4-5/8 Maxforce HMX Shaped Charge Part No.: 101505061 - Shaped charge for oilfield use		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	2.625" HMX Cartridge Assembly Part No.: 101293161 - Cartridge Assembly for use in Drill Collar Severing Tool		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	17/80 RDX LS dnx - is designed for tubing or wireline conveyed perforating systems (reference graph at left) where explosive component interfaces may be affected.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	Nona Detonating Cord Initiator Part No.: 100005309 - Detonating cord initiator for oilfield use.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	3.375 in HMX DP Shaped Charge Part No.: 100005332 - Shaped charge for oilfield use		2011-03-25T01:00:00.000-05:00	2011-03-25T01:00:00.000-05:00		2011-03-25T01:00:00.000-05:00
	2.5 Inch Millennium®HMX Shaped Charge Part No.: 101206251 - Shaped charge for oilfield use.		2011-03-25T01:00:00.000-05:00	2011-03-25T01:00:00.000-05:00		2011-03-25T01:00:00.000-05:00
	5” BH RDX Shaped Charge Part No.: 101269719 - Shaped charge for oilfield use		2013-04-24T01:00:00.000-05:00	2013-04-24T01:00:00.000-05:00		2013-04-24T01:00:00.000-05:00
	101272580-HMX Block Detonator (RED®) 1 Gr 101272580-HMX Block Detonator (RED®)\| 1.0 Gr part no.101272580		2017-04-05T01:00:00.000-05:00	2017-04-05T01:00:00.000-05:00		2017-04-05T01:00:00.000-05:00
	3.625 in. HMX Segmented Explosives Jet Cutter, 54.8g 101978736 - 3.625 in. HMX Segmented Explosives Jet Cutter\| 54.8g		2017-10-06T00:00:00.000-06:00	2017-10-06T00:00:00.000-06:00		2017-10-06T00:00:00.000-06:00
	KIT, EXPLOSIVE & HARDWARE, CUTTER, SEGMENTED, 8.18 IN OD, HMX, 404.8G 101978744 - KIT\| EXPLOSIVE & HARDWARE\| CUTTER\| SEGMENTED\| 8.18 IN OD\| HMX\| 404.8G		2017-10-06T00:00:00.000-06:00	2017-10-06T00:00:00.000-06:00		2017-10-06T00:00:00.000-06:00
	8.625" Tubing 7.250" OD Cutter Part No.: 101293553_8Kpsi/400°F_1.1D UN0059		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	2.375" Tubing 1.688" OD cutter Part No.: 100000352_20Kpsi/400°F_1.4D UN0440		2016-07-28T01:00:00.000-05:00	2016-07-28T01:00:00.000-05:00		2016-07-28T01:00:00.000-05:00
	4.500" Tubing 3.300" OD Cutter Part No.: 10.1293449_12.5Kpsi/400°F_1.1D UN0059		2013-06-19T01:00:00.000-05:00	2013-06-19T01:00:00.000-05:00		2013-06-19T01:00:00.000-05:00
	4.500" Drill Pipe 3.313" OD Cutter Part No.: 100000140_12.5Kpsi/400°F_1.1D UN0059		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	1.562 Pellet HMX Super Cutter Part No.: 100158162 - Pellet Assembly for use in tubing cutter.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	2 in. Sidewinder II HNS Shaped Charge Part No.: 100157018 - Shaped charge for oilfield use.		2012-07-06T01:00:00.000-05:00	2012-07-06T01:00:00.000-05:00		2012-07-06T01:00:00.000-05:00
	2.875 in. Millennium® HNS Shaped Charge Part No.: 101388407 -2.875 in. Millennium™ HNS 18.5 g Shaped Charge for oilfield use.		2011-10-12T01:00:00.000-05:00	2011-10-12T01:00:00.000-05:00		2011-10-12T01:00:00.000-05:00
	Core Gun Load-Low Temp 450 Part No.: 100004189 - Core gun load for use in obtaining formation samples from bore hole.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	4.000" Tubing 2.938" OD Cutter Part No.: 100127821_12.5Kpsi/400°F_1.1D UN0059		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	120 Grain HMX Booster Rod Part No.: 120021223 - Pellet Assembly for use in Casing Cutter		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	3-3/8 RDX BH Shaped Charge Part No: 100005321 - Shaped Charge for oilfield use.		2012-07-06T01:00:00.000-05:00	2012-07-06T01:00:00.000-05:00		2012-07-06T01:00:00.000-05:00
	7 IN 12 & 14 SPF RDX BH MIRAGE™SHAPED CHARGE Part No.: 101484232 - Shaped charge for oilfield use		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	4.625 in HMX 6 SPF DP Shaped Charge Part No.: 101351946 - Shaped charge for oilfield use		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	A-85 Austin Powder Company - Fluid Disabled Resistorized Instantaneous RDX Detonator.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	2.875" Tubing 2.031" OD cutter Part No.: 100000354_20Kpsi/400°F_1.4D UN0440		2016-07-28T01:00:00.000-05:00	2016-07-28T01:00:00.000-05:00		2016-07-28T01:00:00.000-05:00
	POWER CHARGE 2-1/2IN SHORTY HES HT POWER CHARGE 2-1/2IN SHORTY HES HT		2014-01-20T00:00:00.000-06:00	2014-01-20T00:00:00.000-06:00		2014-01-20T00:00:00.000-06:00
	6.625" - 7.000" Tubing 5.500" OD Cutter Part No.: 101293515_9Kpsi/400°F_1.1D UN0059		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	2 IN HMX Cartridge Assembly Cartridge Assembly for use in Drill Collar Severing Tool.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	HNS Resistorized Detonator (D1208) Part No. 100000432 - 50 ohm resistorized electric detonator for oilfield use. Desensitized in fluid after 5 min.		2011-03-25T01:00:00.000-05:00	2011-03-25T01:00:00.000-05:00		2011-03-25T01:00:00.000-05:00
	Venting Device Shaped Charge Part No.: 100157043 - Shaped charge for oilfield use.		2012-07-06T01:00:00.000-05:00	2012-07-06T01:00:00.000-05:00		2012-07-06T01:00:00.000-05:00
	POWER CHARGE - 3-1/2IN SHORTY HT POWER CHARGE - 3-1/2IN SHORTY HT		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	1.50" Coiled Tubing 1.188" OD Cutter Part No.: 100000429 _ 10Kpsi/325°F_1.4D UN0440		2014-12-29T00:00:00.000-06:00	2014-12-29T00:00:00.000-06:00		2014-12-29T00:00:00.000-06:00
	Fireline 8/40 RDX LS Ribbon - Dyno Nobel DNX - Is specially processed ribbon detonating cord using "shrinkage resistant" construction components. Part No.: 101755963\| 1000000149 and 101208988 - Det Cord for oilfield use		2014-01-20T00:00:00.000-06:00	2014-01-20T00:00:00.000-06:00		2014-01-20T00:00:00.000-06:00
	4.625 IN. RDX BH Shaped Charge Part No.: 100005319 - Shaped charge for oilfield use.		2011-10-12T01:00:00.000-05:00	2011-10-12T01:00:00.000-05:00		2011-10-12T01:00:00.000-05:00
	5.500" - 5.750" Tubing 4.750" OD Cutter Part No.: 101293484_9Kpsi/400°F_1.1D UN0059		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	3.3125 in. HMX Segmented Explosives Jet Cutter Kit, 64.8G 101978734 - 3.3125 in. HMX Segmented Explosives Jet Cutter Kit\| 64.8G		2017-10-06T00:00:00.000-06:00	2017-10-06T00:00:00.000-06:00		2017-10-06T00:00:00.000-06:00
	Power Charge - 1-11/16 MULTISTGE HT Power Charge - 1-11/16 MULTISTGE HT		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	3-3/8 in RDX BH Shaped Charge Part No: 100008251 - Shaped Charge for oilfield use.		2012-08-31T01:00:00.000-05:00	2012-08-31T01:00:00.000-05:00		2012-08-31T01:00:00.000-05:00
	4 in. 4 SPF SDP HMX Millennium®Shaped Charge Part No.: 101210636 - Shaped charge for oilfield use		2011-12-12T00:00:00.000-06:00	2011-12-12T00:00:00.000-06:00		2011-12-12T00:00:00.000-06:00
	1 9/16 HMX Tubing Puncher Shaped charge for oilfield use.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	DET CORD 60GR HNS SLIM PT-250 (D/N) DET CORD\| 60GR\| HNS\| SLIM PT-250 (D/N)		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	CLCP INITIATOR OILFIELD ORDNANCE DEVICE Pacific Scientific - This is an oilfield percussion fired detonator used for initiating detonation of oilfield tubing conveyed perforating guns.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	40 RDX LS RIBBON PERFACORD DETOTEC - Special production techniques produce RDX ribbon textile detonating cord.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EXPLOSIVE & HARDWARE KIT, CUTTER, SEGMENTED, 7.25 IN OD, HMX, 421G 101978743 - KIT\| EXPLOSIVE & HARDWARE\| CUTTER\| SEGMENTED\| 7.25 IN OD\| HMX\| 421G		2017-10-06T00:00:00.000-06:00	2017-10-06T00:00:00.000-06:00		2017-10-06T00:00:00.000-06:00
	2.875" Tubing 2.250" OD cutter Part No.: 101290405_12.5Kpsi/400°F_1.4D UN0440		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	2.375" Tubing 1.719" OD cutter Part No.: 100000570_20Kpsi/400°F_1.4D UN0440		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	HMX Detonating Cord Initiator Detonating cord initiator for oilfield use.		2012-01-30T00:00:00.000-06:00	2012-01-30T00:00:00.000-06:00		2012-01-30T00:00:00.000-06:00
	Slim Extension Delay Oil Field Ordnance Device Pacific Scientific - This is a pyrotechnic delay element\| used to provide a time for manipulation of downhole pressure and then initiation of another delay element\| extending the delay time.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	1.75" - 1.90"" Coiled Tubing 1.375" OD Cutter Part No.: 100000569 _ 10Kpsi/325°F_1.4D UN0440		2011-09-09T01:00:00.000-05:00	2011-09-09T01:00:00.000-05:00		2011-09-09T01:00:00.000-05:00
	A–140 Austin Powder Company - Resistorized Instantaneous RDX Detonator		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	3 3/8 in. HMX BH Shaped Charge Shaped charge for oilfield use.		2011-09-02T01:00:00.000-05:00	2011-09-02T01:00:00.000-05:00		2011-09-02T01:00:00.000-05:00
	9.625" Tubing 8.188" OD Cutter Part No.: 101293555_ 9.625" Tubing\| 8.188" OD Cutter - 8Kpsi/400°F_1.1D UN0059		2015-10-13T00:00:00.000-05:00	2015-10-13T00:00:00.000-05:00		2011-03-08T00:00:00.000-06:00
	4.625 in. 12SPF HNS DP Shaped Charge Part No.: 101343830 - Shaped charge for oilfield use		2012-07-06T01:00:00.000-05:00	2012-07-06T01:00:00.000-05:00		2012-07-06T01:00:00.000-05:00
	2.625" HMX Pellet Assembly Part No.: 101293160 - Pellet Assembly for use in Drill Collar Severing Tool.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	5.25 and 7.75 in. HMX Junk Shot Pellet Part No.: 100118437 - Pellet for use in Junk Shot.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	3.125” BASIC HMX DP Shaped Charge Initiator Charge for Junk Shot assembly's 5.25" & 7.75" Part No.: 101293561 - Shaped charge for oilfield use		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	3.375 Time Delay Firing Head Assembly Part No.: 100005230 - The Time Delay Firing head assembly permits underbalance/overbalance perforating through a pressure actuated firing head employing a time delay fuse.		2014-09-30T01:00:00.000-05:00	2014-09-30T01:00:00.000-05:00		2014-09-30T01:00:00.000-05:00
	3.5 In Mirage® HMX Shaped Charge Part No.: 101542642 - Shaped charge for oilfield use		2011-09-12T01:00:00.000-05:00	2011-09-12T01:00:00.000-05:00		2011-09-12T01:00:00.000-05:00
	FIRELINE 17/80 RDX Is economical and used primarily in wireline conveyed perforator carriers where RDX range function capability (as detailed in the graph below) is required.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	3 3/8 in RDX SDP Shaped Charge Part No: 100008014 - Shaped Charge for oilfield use.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	7.625" Tubing 6.125" OD Cutter Part No.: 101293544_9Kpsi/400°F_1.1D UN0059		2012-12-12T00:00:00.000-06:00	2012-12-12T00:00:00.000-06:00		2012-12-12T00:00:00.000-06:00
	Igniter Assembly Core Gun 50 OHM Williams Pyro\| Inc - Resistance range shall be between 50-60 OHMS. The absolute minimum reading is 50 OHMS.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	HMX BOOSTER 12.7 mm Part No.: 101653762 - Booster used in detonation train of perforating guns for oilfield use.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	Detonating Cord DYNAWELL HNS-CORD PT 250 HNS 1.4S Part No.: 2315353 - Temperature and pressure resistant detonating cord for oilfield use. Not recommended for use with exposed gun systems.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	KIT, EXPLOSIVE & HARDWARE, CUTTER, SEGMENTED, 6.12 OD, HMX, 275.5G 101978742 - KIT\| EXPLOSIVE & HARDWARE\| CUTTER\| SEGMENTED\| 6.12 OD\| HMX\| 275.5G		2017-10-06T00:00:00.000-06:00	2017-10-06T00:00:00.000-06:00		2017-10-06T00:00:00.000-06:00
	3.500" Tubing 2.594" OD Cutter Part No.: 100116367_20Kpsi/400°F_1.4D UN0440		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	17/80 RDX LS DNX - Is designed for tubing or wireline conveyed perforating systems (reference graph at left) where explosive component interfaces may be affected.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	BI-DIRECTIONAL BOOSTER - HMX HES BI-DIRECTIONAL BOOSTER - HMX HES		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	4.750 in. HMX HP BH Shaped Charge Part No.: 101787632 -4.750 in. HMX HP\| BH\| Shaped Charge for oilfield use		2011-10-12T01:00:00.000-05:00	2011-10-12T01:00:00.000-05:00		2011-10-12T01:00:00.000-05:00
	2.875 In Dominator® HMX Shaped Charge Part No.: 101414743 - 2.875 In Dominator® HMX Shaped Charge for oilfield use		2012-04-23T01:00:00.000-05:00	2012-04-23T01:00:00.000-05:00		2012-04-23T01:00:00.000-05:00
	17/80 HMX LS XHV dnx - Is designed for use in "high shot density" perforating systems where charge interference may be of concern and employs "shirnkage resistant" construction materials with a higher nominal velocity of detonation (+13% nominal VOD) thank standard HMX cord.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	2.875" Tubing 2.250" OD cutter Part No.: 100000356_20Kpsi/400°F_1.4D UN0440		2012-06-13T01:00:00.000-05:00	2012-06-13T01:00:00.000-05:00		2012-06-13T01:00:00.000-05:00
	1.27 Grams HMX Metal Clad Booster Rod Part No.: 100158153 - Pellet Assembly for use in Casing Cutter.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	KIT, EXPLOSIVE & HARDWARE, CUTTER, SEGMENTED, 4.75 IN, HMX, 114.28G 101978739 - KIT\| EXPLOSIVE & HARDWARE\| CUTTER\| SEGMENTED\| 4.75 IN\| HMX\| 114.28G		2017-10-06T00:00:00.000-06:00	2017-10-06T00:00:00.000-06:00		2017-10-06T00:00:00.000-06:00
	Pellet Cartridge C4 22.7 Grams Part No. 100141897 - C4 Cartridges for use in oil well casing cutter assemblies.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	Igniter Thermal Igniter RED® Go Style Part No.: 101320910 - Electric detonator for oilfield use where RF silence is of concern.		2012-11-05T00:00:00.000-06:00	2012-11-05T00:00:00.000-06:00		2012-11-05T00:00:00.000-06:00
	B00STER HNS 12.7MM 1.4 GRAM Part No.: 101653763 - Booster used in detonation train of perforating guns for oilfield use.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	7 in. MIRAGE®HMX BH HW Shaped Charge Part No.: 101836953 - Shaped charge for oilfield use.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	230 MAXFORCE® - FRAC RDX, 23 Grams Shaped Charge Part no. 102736069 - Shaped charge for oilfield use		2017-09-07T01:00:00.000-05:00	2017-09-07T01:00:00.000-05:00		2017-09-07T01:00:00.000-05:00
	Bi-Directional Booster DYNAWELL HMX 1.4S DYNAenergetics - Part No.: 2313244 - Temperature resistant bi-directional booster for oilfield use.		2015-08-31T01:00:00.000-05:00	2015-08-31T01:00:00.000-05:00		2015-08-31T01:00:00.000-05:00
	40 HMX LS PERFACORD DETOTEC - Reduced dimension HMX textile detonating cord is designed using shrinkage resistant components.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	102478439-HMX Block Detonator (RED®) 1 Gr HMX Block Detonator (RED®)\| 1.0 Grams Part no. 102478439		2016-03-10T00:00:00.000-06:00	2016-03-10T00:00:00.000-06:00		2016-03-10T00:00:00.000-06:00
	Core Gun Load Assembly-Low Temp 500 Part No.: 100004190 - Core gun load for use in obtaining formation samples from bore hole.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	2.5 Time Delay Firing Head Assembly Part No.: 100005231 - The Time Delay Firing head assembly permits underbalance/overbalance perforating through a pressure actuated firing head employing a time delay fuse.		2014-09-30T01:00:00.000-05:00	2014-09-30T01:00:00.000-05:00		2014-09-30T01:00:00.000-05:00
	1.25" Coiled Tubing .948" OD Cutter Part No.: 100118389 _ 10Kpsi/325°F_1.4D UN0440		2014-02-03T00:00:00.000-06:00	2014-02-03T00:00:00.000-06:00		2014-02-03T00:00:00.000-06:00
	5 inch 12SPF SH RDX Shaped Charge Mirage® Part No.: 101307494 - Shaped charge for oilfield use.		2011-10-12T01:00:00.000-05:00	2011-10-12T01:00:00.000-05:00		2011-10-12T01:00:00.000-05:00
	3.125” Millennium Express DP RDX Shaped Charge Part No.: 101618998 - Shaped charge for oilfield use		2011-10-12T01:00:00.000-05:00	2011-10-12T01:00:00.000-05:00		2011-10-12T01:00:00.000-05:00
	Electric Initiation Device Selection Chart Resistorized Bridge ™ Detonators & Igniters Owen Oil Tools - Owen Oil Tools recommends firing RB™ Detonators & Igniters by raising the current slowly from 0 to 1.0 Amp until detonator fires.		2011-06-09T01:00:00.000-05:00	2011-06-09T01:00:00.000-05:00		2011-06-09T01:00:00.000-05:00
	6.5 in Mirage™ RDX BH LD 47g Shaped Charge 101304878 - 6.5 in Mirage™\| RDX\| BH\| LD\| 47g Shaped Charge for oilfield use		2011-11-07T00:00:00.000-06:00	2011-11-07T00:00:00.000-06:00		2011-11-07T00:00:00.000-06:00
	High Temperature Percussion Detonator Oilfield Ordnance Device Pacific Scientific - This is an oilfield percussion fired detonator used primarily for initiating detonation of oilfield tubing conveyed perforating guns.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	2.75 in HNS DP MILLENNIUM™Shaped Charge Part No.: 101318485 - 2.75 in MILLENNIUM™\|DP\|HNS\|15 G Shaped Charge for oilfield use		2011-10-11T01:00:00.000-05:00	2011-10-11T01:00:00.000-05:00		2011-10-11T01:00:00.000-05:00
	4 5/8 in. HMX DP Shaped Charge Part No.: 100005327 - Shaped charge for oilfield use.		2011-09-02T01:00:00.000-05:00	2011-09-02T01:00:00.000-05:00		2011-09-02T01:00:00.000-05:00
	8/40 HMX LS dnx - Is manufactured in the stardard round configuration (small dimensional) using “shrinkage resistant” construction components.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	3 3/8 in. HMX BH Shaped Charge Part No.: 100005312 - Shaped charge for oilfield use.		2011-09-02T01:00:00.000-05:00	2011-09-02T01:00:00.000-05:00		2011-09-02T01:00:00.000-05:00
	6.5 in. Mirage® HMX BH Shaped Charge Part No.: 101329124 - Shaped charge for oilfield use		2011-09-12T01:00:00.000-05:00	2011-09-12T01:00:00.000-05:00		2011-09-12T01:00:00.000-05:00
	17/80 HMX LS dnx - Is designed to be used in carrier-based perforating systems within HMX time and temperature operating ranges\| where the jacket is protected or not exposed to pressure and/or fl uids.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	Delay Element Oilfifeld Ordnance Device Pacific Scientific - This is a pyrotechnic delay element\| used to provide a period of time for manipulation of downhole pressure and then a detonation\| used to initiate detonation of oilfield tubing conveyed perforating guns.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	2.375 in. Drill Pipe Cutter HMX Part No.: 100116368		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	2.75 in. BH HMX Shaped Charge Part No.: 101270158 - Shaped charge for oilfield use		2011-10-12T01:00:00.000-05:00	2011-10-12T01:00:00.000-05:00		2011-10-12T01:00:00.000-05:00
	4.625 in. MILLENNIUM® II HMX 5SPF Shaped Charge Part No.: 101702911 - Shaped charge for oilfield use		2011-03-25T01:00:00.000-05:00	2011-03-25T01:00:00.000-05:00		2011-03-25T01:00:00.000-05:00
	101206793-2.75 in. RDX BH Shaped Charge Part No.: 101206793 - Shaped charge for oilfield use.		2012-06-13T01:00:00.000-05:00	2012-06-13T01:00:00.000-05:00		2012-06-13T01:00:00.000-05:00
	2 IN HMX Pellet Assembly Part No.: 100118425 - Pellet Assembly for use in Drill Collar Severing Tool.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	3-3/8 in Millennium HNS Shaped Charge Part No.: 101365876		2011-03-25T01:00:00.000-05:00	2011-03-25T01:00:00.000-05:00		2011-03-25T01:00:00.000-05:00
	7.000" Tubing 6.000" OD Cutter Part No.: 101293536_9Kpsi/400°F_1.1D UN0059		2012-11-05T00:00:00.000-06:00	2012-11-05T00:00:00.000-06:00		2012-11-05T00:00:00.000-06:00
	7 in Super Hole RDX 56.5 Grams Shaped Charge 101213474 - 7 in\| Super Hole\| RDX 56.5 Grams Shaped Charge for oilfield use		2011-11-07T00:00:00.000-06:00	2011-11-07T00:00:00.000-06:00		2011-11-07T00:00:00.000-06:00
	DETONATOR UTILITY (18" LEADS) DETONATOR\| UTILITY (18" LEADS)		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	KIT, EXPLOSIVE & HARDWARE, CUTTER, SEGMENTED, 2.9375 IN OD, HMX, 56.9G 101978733 - KIT\| EXPLOSIVE & HARDWARE\| CUTTER\| SEGMENTED\| 2.9375 IN OD\| HMX\| 56.9G		2017-10-06T00:00:00.000-06:00	2017-10-06T00:00:00.000-06:00		2017-10-06T00:00:00.000-06:00
	Core Gun Load - Low Temp 600 Part No.: 100142075 - Core gun load for use in obtaining formation samples from bore hole.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	1.812 In. Kit Tubing Cutter HMX SuperCutter Part No.: 100008057 - Pipe cutter for severing tubing or casing for oil field pipe recovery operations\| where well conditions prevent use of conventional tubing cutters.		2011-09-09T01:00:00.000-05:00	2011-09-09T01:00:00.000-05:00		2011-09-09T01:00:00.000-05:00
	TUBING CUTTER 2-1/4IN HMX TUBING CUTTER 2-1/4IN HMX		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	5 1/4 in. Junk Shot HMX Shaped Charge Part No.: 100157003 - Shaped charge for oilfield use.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	7 in. 15SPF MIRAGEHMX BH Shaped Charge Part No.: 101716920 - Shaped charge for oilfield use		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	Detonator RED® Capsule Plug-in Part No.: 101272600 - Electric detonator for oilfield use.		2014-11-03T00:00:00.000-06:00	2014-11-03T00:00:00.000-06:00		2014-11-03T00:00:00.000-06:00
	7 3/4 in. Junk Shot HMX Shaped Charge Part No.: 100157002 - Shaped charge for oilfield use.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	1.562 Tubing Puncher Part No.: 101434900 - 1.562 Tubing Puncher for oilfield use		2011-12-19T00:00:00.000-06:00	2011-12-19T00:00:00.000-06:00		2011-12-19T00:00:00.000-06:00
	7 In 18SPF Mirage Big Hole HMX Shaped Charge Part No.: 101414821 - Shaped charge for oilfield use		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	1.812 In. Pellet HMX SuperCutter Part No.: 100158161 - Pellet Assembly for use in Drill Collar Severing Tool.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	2.875" Tubing 2.125" OD cutter Part No.: 100000430_20Kpsi/400°F_1.1D UN0059_Hastalloy		2012-12-12T00:00:00.000-06:00	2012-12-12T00:00:00.000-06:00		2012-12-12T00:00:00.000-06:00
	2.875" Tubing 1.813" OD cutter Part No.: 102012508_20Kpsi/400°F_1.4D UN0440		2012-02-03T00:00:00.000-06:00	2012-02-03T00:00:00.000-06:00		2012-02-03T00:00:00.000-06:00
	2.375" Tubing 1.563" OD cutter Part No.: 102012507_20Kpsi/400°F_1.4D UN0440		2012-02-03T00:00:00.000-06:00	2012-02-03T00:00:00.000-06:00		2012-02-03T00:00:00.000-06:00
	KIT, EXPLOSIVE & HARDWARE, CUTTER, SEGMENTED, 4.5IN, HMX, 114.28G 101978738 - KIT\| EXPLOSIVE & HARDWARE\| CUTTER\| SEGMENTED\| 4.5IN\| HMX\| 114.28G		2017-10-06T00:00:00.000-06:00	2017-10-06T00:00:00.000-06:00		2017-10-06T00:00:00.000-06:00
	40 HMX LS RIBBON PERFACORD DETOTEC - Special production techniques produce HMX ribbon textile detonating cord.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	POWER CHARGE - 3-1/2IN SHORTY LT POWER CHARGE - 3-1/2IN SHORTY LT		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	7 In. MIRAGE®18SPF BH Shaped Charge Part No.: 101711688 - Shaped charge for oilfield use		2012-02-07T00:00:00.000-06:00	2012-02-07T00:00:00.000-06:00		2012-02-07T00:00:00.000-06:00
	4.625 in 6 SPF DP RDX Shaped Charge Part No.: 101351945 - Shaped charge for oilfield use		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	2.875" Tubing 2.125" OD cutter Part No.: 100000355_20Kpsi/400°F_1.4D UN0440		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	3.125 In Millennium®DP HMX Shaped Charge Part No.: 101366678 - Shaped charge for oilfield use		2011-03-25T01:00:00.000-05:00	2011-03-25T01:00:00.000-05:00		2011-03-25T01:00:00.000-05:00
	Core Gun Load-Low Temp 550 Core gun load for use in obtaining formation samples from bore hole.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	40 RDX LS PERFACORD DETOTEC - Reduced dimension RDX textile detonating cord is produced using shrinkage resistant components.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	HNS Resistorized Detonator (Top Fire® ) Part No.: 101007855 - 51 ohm resistorized electric detonator for oilfield use. Desensitized in fluid after 5 min.		2011-03-25T01:00:00.000-05:00	2011-03-25T01:00:00.000-05:00		2011-03-25T01:00:00.000-05:00
	Igniter Thermol Igniter RED® Go Style 1.00 G Igniter\| Thermol Igniter\| RED®\| Go Style\| 1.00 G part no. 102351326		2016-01-04T00:00:00.000-06:00	2016-01-04T00:00:00.000-06:00		2016-01-04T00:00:00.000-06:00
	1.5625 in. Tubing Puncher Part No.: 101434895 - 1.5625 in. Tubing Puncher for oilfield use		2011-10-12T01:00:00.000-05:00	2011-10-12T01:00:00.000-05:00		2011-10-12T01:00:00.000-05:00
	5 inch Maxim® Dual String RDX 47 G Shaped Charge 101350449 -5 inch Maxim® Dual String RDX 47 G Shaped Charge for oilfield use		2011-11-07T00:00:00.000-06:00	2011-11-07T00:00:00.000-06:00		2011-11-07T00:00:00.000-06:00
	Charge Drop Bar Initiator Shaped Charge Part No: 100005310 - Shaped charge for oilfield use.		2011-06-28T01:00:00.000-05:00	2011-06-28T01:00:00.000-05:00		2011-06-28T01:00:00.000-05:00
	2.75 in MILLENNIUM®6SPF HMX SDPShaped Charge Part No.: 101233817 - Shaped charge for oilfield use.		2014-05-06T01:00:00.000-05:00	2014-05-06T01:00:00.000-05:00		2014-05-06T01:00:00.000-05:00
	4” Millennium® GSC STD WSHR RDX DP Shaped Charge Part No.: 101288857 - Shaped charge for oilfield use		2011-03-25T01:00:00.000-05:00	2011-03-25T01:00:00.000-05:00		2011-03-25T01:00:00.000-05:00
	1.5625 IN SUPERCUTTER KIT WITH PELLETS Part No.: 100118419 - Explosives Kit. Assembly Drill Collar Severing Tool.		2012-02-03T00:00:00.000-06:00	2012-02-03T00:00:00.000-06:00		2012-02-03T00:00:00.000-06:00
	Diamondback shorty power charges Part No.: 494028_494030_494031 - Diamondback Industries\| Inc. - Diamondback shorty power charges		2014-05-06T01:00:00.000-05:00	2014-05-06T01:00:00.000-05:00		2014-05-06T01:00:00.000-05:00
	3.500" Tubing 2.500" OD Cutter Part No.: 101290406_12.5Kpsi/400°F_1.4D UN0440		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	Nona Detonating Cord Initiator Threaded Part No.: 100156999 - Detonating Cord Initiator used in detonation train of perforating guns for oilfield use.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	4 In RDX DP Slickwall Twisted Strip Shaped Charge Part No. 101310802 - Shaped charge for oilfield use		2011-10-12T01:00:00.000-05:00	2011-10-12T01:00:00.000-05:00		2011-10-12T01:00:00.000-05:00
	101905821-HMX Block Detonator (RED®) FR HMX Block Detonator (RED®) Fast Response part no 101905821		2016-05-04T01:00:00.000-05:00	2016-05-04T01:00:00.000-05:00		2016-05-04T01:00:00.000-05:00
	3.125 Mirage® HMX Shaped Charge Part No.: 101351605 - Shaped charge for oilfield use		2011-09-12T01:00:00.000-05:00	2011-09-12T01:00:00.000-05:00		2011-09-12T01:00:00.000-05:00
	5.5 in. OD Casing Cutter Pellet RDX Part No.: 100158222 - Pellet for use in casing cutters.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	Mild Detonating Fuse Assy 1.375 In DCST-A S274-5 Part No.: 100118417 - Booster used in detonation train of perforating guns for oilfield use.		2012-11-05T00:00:00.000-06:00	2012-11-05T00:00:00.000-06:00		2012-11-05T00:00:00.000-06:00
	5.500" Tubing 4.500" OD Cutter Part No.: 100014494_9Kpsi/400°F_1.1D UN0059		2012-08-31T01:00:00.000-05:00	2012-08-31T01:00:00.000-05:00		2012-08-31T01:00:00.000-05:00
	Venting Device Shaped Charge HNS Part No.: 101288565 - Shaped charge for oilfield use		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	2.375" Tubing 1.813" OD cutter Part No.: 101290400_12.5Kpsi/400°F_1.4D UN0440		2011-09-09T01:00:00.000-05:00	2011-09-09T01:00:00.000-05:00		2011-09-09T01:00:00.000-05:00
	KIT, EXPLOSIVE & HARDWARE, CUTTER, SEGMENTED, 6.0 IN OD, HMX, 275.5G 101978741 - KIT\| EXPLOSIVE & HARDWARE\| CUTTER\| SEGMENTED\| 6.0 IN OD\| HMX\| 275.5G		2017-10-06T00:00:00.000-06:00	2017-10-06T00:00:00.000-06:00		2017-10-06T00:00:00.000-06:00
	A-105-100 Austin Powder Company - High Pressure Resistorized Instantaneous RDX Detonator		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	5-1/8 in HMX SH Shaped Charge Part No.: 100157011 - Shaped charge for oilfield use.		2011-09-02T01:00:00.000-05:00	2011-09-02T01:00:00.000-05:00		2011-09-02T01:00:00.000-05:00
	2.375" Tubing 1.813" OD cutter Part No.: 100000353_20Kpsi/400°F_1.4D UN0440		2012-06-13T01:00:00.000-05:00	2012-06-13T01:00:00.000-05:00		2012-06-13T01:00:00.000-05:00
	3.500" Tubing 2.700" OD Cutter Part No.: 100000431_20Kpsi/400°F_1.1D UN0059_Hastalloy		2013-04-24T01:00:00.000-05:00	2013-04-24T01:00:00.000-05:00		2013-04-24T01:00:00.000-05:00
	Percussion Initiator Fike - The Fike Percussion Initiators are percussion fired initiators for use in downhole oil and gas completion operations.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	NONA BOOSTER 12.7MM 1.25 GRAMS Part No.: 101653965 - Booster used in detonation train of perforating guns for oilfield use.		2012-01-18T00:00:00.000-06:00	2012-01-18T00:00:00.000-06:00		2012-01-18T00:00:00.000-06:00
	5.000" Tubing 4.000" OD Cutter Part No.: 101293457_9Kpsi/400°F_1.1D UN0059		2012-08-31T01:00:00.000-05:00	2012-08-31T01:00:00.000-05:00		2012-08-31T01:00:00.000-05:00
	Bi-Directional Booster DYNAWELL HNS 1.4S dynaenergetics - Part No.: 2313245 - Temeperature resistant bi-directional booster for oilfield use.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	3.500" Tubing 2.700" OD Cutter Part No.: 100011034_20Kpsi/400°F_1.4D UN0440		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	80 PETN WP PERFACORD DETOTEC -		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	2.375" Tubing 1.688" OD cutter Part No.: 101288527_12.5Kpsi/400°F_1.4D UN0440		2011-09-09T01:00:00.000-05:00	2011-09-09T01:00:00.000-05:00		2011-09-09T01:00:00.000-05:00
	MILLENNIUM Express 3-1/8 in. RDX Charges Jet Research Center’s 3-1/8 in. MILLENNIUM™ Express RDX shaped charges joins its line of proven shaped charges to give you the MILLENNIUM charge performance you demand.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	210 MaxForce-FRAC Charge The MaxFORCE Frac shaped charge breaks new ground in perforating technology by producing casing entry holes and perforation tunnels that greatly improve hydraulic fracturing efficiency.		2015-07-28T01:00:00.000-05:00	2015-07-28T01:00:00.000-05:00		2015-07-28T01:00:00.000-05:00
	Pipe Recovery Includes a complete listing and specifications for JRC tubing and casing cutters\| coiled tubing cutters and drill collar severing tools.		2018-07-01T00:00:00.000-05:00	2018-07-01T00:00:00.000-05:00		2017-10-05T00:00:00.000-06:00
	MILLENNIUM Express 3-3/8 in. RDX Charges Jet Research Center’s 3-3/8 in. MILLENNIUM™ Express RDX shaped charge joins its line of proven shaped charges to give you the MILLENNIUM charge performance you demand.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	RED RF Safe Detonators Perforating safety has long been a driving force within our industry since the introduction of explosives to well completion methods.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	Appendices (Det Cord Specs Gun Swell Data O-Ring Charts) Appendix for JRC Catalog		2014-05-19T01:00:00.000-05:00	2014-05-19T01:00:00.000-05:00		2014-05-19T01:00:00.000-05:00
	Plugs and Setting Tools Jet Research Center offers a variety of fieldproven\| reliable plugs\| setting tools\| and associated equipment.		2014-05-19T01:00:00.000-05:00	2014-05-19T01:00:00.000-05:00		2014-05-19T01:00:00.000-05:00
	RF-safe & Resistor Type Detonators Detonator Cord Boosters Jet Research Center’s explosive components have been designed using sound engineering principles and test procedures and are manufactured or selected with strict attention to quality and safety.		2014-05-19T01:00:00.000-05:00	2014-05-19T01:00:00.000-05:00		2014-05-19T01:00:00.000-05:00
	Pipe Recovery Jet Research Center offers a variety of field-proven\| reliable pipe recovery equipment to satisfy the high demands in the oilfield industry.		2014-05-19T01:00:00.000-05:00	2014-05-19T01:00:00.000-05:00		2014-05-19T01:00:00.000-05:00
	EX1983070048 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1987030045 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1997010142 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX2002010272 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1985060046 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1999120055 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1986050102 U.S. DOT - Classification of explosives. -EX1986050102		2014-09-09T01:00:00.000-05:00	2014-09-09T01:00:00.000-05:00		2014-09-09T01:00:00.000-05:00
	EX2000090058 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1997030052 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1984110191 U.S. DOT - Classification of explosives. EX1984110191		2012-01-15T00:00:00.000-06:00	2012-01-15T00:00:00.000-06:00		2012-01-15T00:00:00.000-06:00
	EX1996010024 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX2000090056 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1987060030 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1996080031 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1987050471 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1983070052 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1997010144 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1985070018 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1987060128 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1986080019 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1993030175 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX2008060097 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1988090125 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1983080674 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX9409078 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1997010044 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX2002080050 U.S. DOT - Classification of explosives.		2011-11-07T00:00:00.000-06:00	2011-11-07T00:00:00.000-06:00		2011-11-07T00:00:00.000-06:00
	EX1997010145 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1984110193 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1993040143 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1983070047 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1993040141 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1991110282 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1983070054 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX2009020083 U.S. DOT - Classification of explosives. EX2009020083		2015-07-09T01:00:00.000-05:00	2015-07-09T01:00:00.000-05:00		2015-07-09T01:00:00.000-05:00
	EX1987030041 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1992030012 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX2008040071 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1993100012 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX2002040363 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1983080677 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1993030178 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1992020035 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1983070055 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1984110192 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX9405290 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1986060138 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1987100311 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1986070107 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX2000050091 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX2004100102 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1989080258 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX2006110356 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1993030180A U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1993030177 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1983120569 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1997080094 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1983070051 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX2004100104 U.S. DOT - Classification of explosives. EX2004100104		2015-03-02T00:00:00.000-06:00	2015-03-02T00:00:00.000-06:00		2015-03-02T00:00:00.000-06:00
	EX2008040073 U.S. DOT - Classification of explosives.		2012-07-06T01:00:00.000-05:00	2012-07-06T01:00:00.000-05:00		2012-07-06T01:00:00.000-05:00
	EX2010060666 U.S. DOT - Classification of explosives. EX2010060666		2012-08-17T01:00:00.000-05:00	2012-08-17T01:00:00.000-05:00		2012-08-17T01:00:00.000-05:00
	EX2002060166 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1993030181 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1985070016 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX2003040091 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1987090016 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX20020210271 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1998030017 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1990070084 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX2000020062 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX9207009A U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX2003040198 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX2002040362 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1984020274 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1985070014 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1993100010 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX2003050062 U.S. DOT - Classification of explosives. Z477 (PIN 101329124)		2011-08-19T01:00:00.000-05:00	2011-08-19T01:00:00.000-05:00		2011-08-19T01:00:00.000-05:00
	EX1992100065 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1996010025 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1983080700 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1993090180 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1993090115 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX2002010273 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX2001020254 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1998050151A U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1995120031 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1993030174 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX2007090098 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1999030158 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1987030043 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1986050099 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX8703325 U.S. DOT - Classification of explosives. EX8703325		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1991090189 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1996050007 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX2004020380 U.S. DOT - Classification of explosives. EX2004020380		2012-12-12T00:00:00.000-06:00	2012-12-12T00:00:00.000-06:00		2012-12-12T00:00:00.000-06:00
	EX1983080059 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX2003040197 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX2002060007 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1983080672 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1998070016 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1986050115 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX2000120102 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX2000020063 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX2006010093 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1983080603 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX2001020253 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1996100098 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1983070056 U.S. DOT - Classification of explosives. EX1983070056.		2012-06-25T01:00:00.000-05:00	2012-06-25T01:00:00.000-05:00		2012-06-25T01:00:00.000-05:00
	EX1985070015 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX2009080482 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1986080027 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1985070023 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX2002060008 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1999010232 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1998070015 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX2000100120 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX8703326 U.S. DOT - Classification of explosives.		2011-03-08T00:00:00.000-06:00	2011-03-08T00:00:00.000-06:00		2011-03-08T00:00:00.000-06:00
	EX1993010191

Explosive Devices

Resources

Explosive Devices

Choose Area