Explosive Devices - Jet Research Center®

Explosive Devices

JRC offers a wide range of explosive components for oil & gas and ordinance disposal.

Products include shaped charges, tubing & casing cutters, drill collar severing tools and drill pipe cutters. RF-safe detonators, detonating cord, and low-cost resistive detonators are also available.

For ordinance disposal, JRC offers cost-effective solutions in a wide variety of sizes and explosive gram weights.

Resources

Explosive Devices

Filter By  
Количество записей на странице Show     results per page
  TitleНазвание  DateДата
Summary Summary PRESSED PELLETS OF HMX
CE CERTIFICATE ENB/B/022 PRESSED PELLETS OF HMX
Summary Summary Segmented Casing Cutters
Shaped charge.
Summary Summary Tubing Cutters
Shaped charge.
Summary Summary Tubing Cutters-HMX
High (Blasting) explosive.
Summary Summary Rig Environment Detonators
RED Detonator CE MARK
Summary Summary HNS Cord PT 250
Detonating cord.
Summary Summary CE Type 1502
Shaped charge.
Summary Summary Non-Electric Detonators-NONA
Detonator.
Summary Summary BI Directional Booster Z 909
Detonating booster.
Summary Summary RDX Capsule Charges
High (Blasting) explosive.
Summary Summary HNS Mild Detonating Fuze Assemblies
Detonating cord.
Summary Summary HMX (LX-tO) Cartridges
High (Blasting) explosive.
Summary Summary Charge Casing & Drill Pipe Cutters-HMX
High (Blasting) explosive.
Summary Summary Perfacord 80 HMX LS XHV
Detonating cord.
Summary Summary HMX Booster Rods
High (Blasting) explosive.
Summary Summary Non-Electric Detonators and Boosters-HNX
Detonator.
Summary Summary HMX Capsule Charges
High (Blasting) explosive.
Summary Summary 3.125 in. GSC RDX DP Shaped Charge
Part No.: 101410556 - Shaped charge for oilfield use
Summary Summary Electronic Igniter DYNAWELL For Setting Tool
DYNAenergetics - Part No.: 2465201 - RF-SAFE| Temperature resistant igniter for oilfield use.
Summary Summary 4-5/8 Maxforce HMX Shaped Charge
Part No.: 101505061 - Shaped charge for oilfield use
Summary Summary 17/80 RDX LS
dnx - is designed for tubing or wireline conveyed perforating systems (reference graph at left) where explosive component interfaces may be affected.
Summary Summary 3.375 in HMX DP Shaped Charge
Part No.: 100005332 - Shaped charge for oilfield use
Summary Summary 2.5 Inch Millennium®HMX Shaped Charge
Part No.: 101206251 - Shaped charge for oilfield use.
Summary Summary A-85
Austin Powder Company - Fluid Disabled Resistorized Instantaneous RDX Detonator.
Summary Summary HNS Resistorized Detonator (D1208)
Part No. 100000432 - 50 ohm resistorized electric detonator for oilfield use. Desensitized in fluid after 5 min.
Summary Summary POWER CHARGE - 3-1/2IN SHORTY HT
POWER CHARGE - 3-1/2IN SHORTY HT
Summary Summary Power Charge - 1-11/16 MULTISTGE HT
Power Charge - 1-11/16 MULTISTGE HT
Summary Summary DET CORD 60GR HNS SLIM PT-250 (D/N)
DET CORD| 60GR| HNS| SLIM PT-250 (D/N)
Summary Summary CLCP INITIATOR OILFIELD ORDNANCE DEVICE
Pacific Scientific - This is an oilfield percussion fired detonator used for initiating detonation of oilfield tubing conveyed perforating guns.
Summary Summary 40 RDX LS RIBBON PERFACORD
DETOTEC - Special production techniques produce RDX ribbon textile detonating cord.
Summary Summary 2.625" HMX Pellet Assembly
Part No.: 101293160 - Pellet Assembly for use in Drill Collar Severing Tool.
Summary Summary 3.125” BASIC HMX DP Shaped Charge Initiator Charge for Junk Shot assembly's 5.25" & 7.75"
Part No.: 101293561 - Shaped charge for oilfield use
Summary Summary FIRELINE 17/80 RDX
Is economical and used primarily in wireline conveyed perforator carriers where RDX range function capability (as detailed in the graph below) is required.
Summary Summary Igniter Assembly Core Gun 50 OHM
Williams Pyro| Inc - Resistance range shall be between 50-60 OHMS. The absolute minimum reading is 50 OHMS.
Summary Summary Detonating Cord DYNAWELL HNS-CORD PT 250 HNS 1.4S
Part No.: 2315353 - Temperature and pressure resistant detonating cord for oilfield use. Not recommended for use with exposed gun systems.
Summary Summary 17/80 RDX LS
DNX - Is designed for tubing or wireline conveyed perforating systems (reference graph at left) where explosive component interfaces may be affected.
Summary Summary 17/80 HMX LS XHV
dnx - Is designed for use in "high shot density" perforating systems where charge interference may be of concern and employs "shirnkage resistant" construction materials with a higher nominal velocity of detonation (+13% nominal VOD) thank standard HMX cord.
Summary Summary 1.27 Grams HMX Metal Clad Booster Rod
Part No.: 100158153 - Pellet Assembly for use in Casing Cutter.
Summary Summary 40 HMX LS PERFACORD
DETOTEC - Reduced dimension HMX textile detonating cord is designed using shrinkage resistant components.
Summary Summary 8/40 HMX LS
dnx - Is manufactured in the stardard round configuration (small dimensional) using “shrinkage resistant” construction components.
Summary Summary Delay Element Oilfifeld Ordnance Device
Pacific Scientific - This is a pyrotechnic delay element| used to provide a period of time for manipulation of downhole pressure and then a detonation| used to initiate detonation of oilfield tubing conveyed perforating guns.
Summary Summary 4.625 in. MILLENNIUM® II HMX 5SPF Shaped Charge
Part No.: 101702911 - Shaped charge for oilfield use
Summary Summary 3-3/8 in Millennium HNS Shaped Charge
Part No.: 101365876
Summary Summary 80 RDX LS XHV
detotec - A higher velocity RDX PERFACORD® for use in high shot density perforating systems where charge interference may be a factor.
Summary Summary DETONATOR UTILITY (18" LEADS)
DETONATOR| UTILITY (18" LEADS)
Summary Summary TUBING CUTTER 2-1/4IN HMX
TUBING CUTTER 2-1/4IN HMX
Summary Summary 7 in. 15SPF MIRAGEHMX BH Shaped Charge
Part No.: 101716920 - Shaped charge for oilfield use
Summary Summary 7 In 18SPF Mirage Big Hole HMX Shaped Charge
Part No.: 101414821 - Shaped charge for oilfield use
Summary Summary 40 HMX LS RIBBON PERFACORD
DETOTEC - Special production techniques produce HMX ribbon textile detonating cord.
Summary Summary POWER CHARGE - 3-1/2IN SHORTY LT
POWER CHARGE - 3-1/2IN SHORTY LT
Summary Summary Core Gun Load-Low Temp 550
Core gun load for use in obtaining formation samples from bore hole.
Summary Summary 40 RDX LS PERFACORD
DETOTEC - Reduced dimension RDX textile detonating cord is produced using shrinkage resistant components.
Summary Summary HNS Resistorized Detonator (Top Fire® )
Part No.: 101007855 - 51 ohm resistorized electric detonator for oilfield use. Desensitized in fluid after 5 min.
Summary Summary 4” Millennium® GSC STD WSHR RDX DP Shaped Charge
Part No.: 101288857 - Shaped charge for oilfield use
Summary Summary Nona Detonating Cord Initiator Threaded
Part No.: 100156999 - Detonating Cord Initiator used in detonation train of perforating guns for oilfield use.
Summary Summary Venting Device Shaped Charge HNS
Part No.: 101288565 - Shaped charge for oilfield use
Summary Summary A-105-100
Austin Powder Company - High Pressure Resistorized Instantaneous RDX Detonator
Summary Summary Percussion Initiator
Fike - The Fike Percussion Initiators are percussion fired initiators for use in downhole oil and gas completion operations.
Summary Summary Bi-Directional Booster DYNAWELL HNS 1.4S
dynaenergetics - Part No.: 2313245 - Temeperature resistant bi-directional booster for oilfield use.
Summary Summary 4.625 in. OMNI™HMX DP/LD Shaped Charge
Part No.: 100005340 - Shaped charge for oilfield use.
Summary Summary 2.625" HMX Cartridge Assembly
Part No.: 101293161 - Cartridge Assembly for use in Drill Collar Severing Tool
Summary Summary Nona Detonating Cord Initiator
Part No.: 100005309 - Detonating cord initiator for oilfield use.
Summary Summary 1.562 Pellet HMX Super Cutter
Part No.: 100158162 - Pellet Assembly for use in tubing cutter.
Summary Summary Core Gun Load-Low Temp 450
Part No.: 100004189 - Core gun load for use in obtaining formation samples from bore hole.
Summary Summary 80 HMX LS ZYTEL
Detotec - Tubing or wireline conveyed perforating systems subjected to time and temperature exposure (see graph).
Summary Summary 120 Grain HMX Booster Rod
Part No.: 120021223 - Pellet Assembly for use in Casing Cutter
Summary Summary 7 IN 12 & 14 SPF RDX BH MIRAGE™SHAPED CHARGE
Part No.: 101484232 - Shaped charge for oilfield use
Summary Summary 4.625 in HMX 6 SPF DP Shaped Charge
Part No.: 101351946 - Shaped charge for oilfield use
Summary Summary 2 IN HMX Cartridge Assembly
Cartridge Assembly for use in Drill Collar Severing Tool.
Summary Summary 1 9/16 HMX Tubing Puncher
Shaped charge for oilfield use.
Summary Summary Slim Extension Delay Oil Field Ordnance Device
Pacific Scientific - This is a pyrotechnic delay element| used to provide a time for manipulation of downhole pressure and then initiation of another delay element| extending the delay time.
Summary Summary A–140
Austin Powder Company - Resistorized Instantaneous RDX Detonator
Summary Summary 3 3/8 in. HMX BH Shaped Charge
Shaped charge for oilfield use.
Summary Summary 5.25 and 7.75 in. HMX Junk Shot Pellet
Part No.: 100118437 - Pellet for use in Junk Shot.
Summary Summary 3 3/8 in RDX SDP Shaped Charge
Part No: 100008014 - Shaped Charge for oilfield use.
Summary Summary 80 HMX LS XHV
detotec - Special process Detotec 80 HMX PERFACORD® designed for use in "High Shot Density" perforating systems where charge interference may be of concern.
Summary Summary BI-DIRECTIONAL BOOSTER - HMX HES
BI-DIRECTIONAL BOOSTER - HMX HES
Summary Summary Pellet Cartridge C4 22.7 Grams
Part No. 100141897 - C4 Cartridges for use in oil well casing cutter assemblies.
Summary Summary B00STER HNS 12.7MM 1.4 GRAM
Part No.: 101653763 - Booster used in detonation train of perforating guns for oilfield use.
Summary Summary 7 in. MIRAGE®HMX BH HW Shaped Charge
Part No.: 101836953 - Shaped charge for oilfield use.
Summary Summary Core Gun Load Assembly-Low Temp 500
Part No.: 100004190 - Core gun load for use in obtaining formation samples from bore hole.
Summary Summary 80 RDX NYLON PERFACORD
DETOTEC - Primarily for use in wireline conveyed perforating systems to be employed at time and temperature (see graph).
Summary Summary 5 inch 12SPF SH RDX Shaped Charge Mirage®
Part No.: 101307494 - Shaped charge for oilfield use.
Summary Summary 3.125” Millennium Express DP RDX Shaped Charge
Part No.: 101618998 - Shaped charge for oilfield use
Summary Summary Electric Initiation Device Selection Chart Resistorized Bridge ™ Detonators & Igniters
Owen Oil Tools - Owen Oil Tools recommends firing RB™ Detonators & Igniters by raising the current slowly from 0 to 1.0 Amp until detonator fires.
Summary Summary High Temperature Percussion Detonator Oilfield Ordnance Device
Pacific Scientific - This is an oilfield percussion fired detonator used primarily for initiating detonation of oilfield tubing conveyed perforating guns.
Summary Summary 6.5 in. Mirage® HMX BH Shaped Charge
Part No.: 101329124 - Shaped charge for oilfield use
Summary Summary 17/80 HMX LS
dnx - Is designed to be used in carrier-based perforating systems within HMX time and temperature operating ranges| where the jacket is protected or not exposed to pressure and/or fl uids.
Summary Summary 2.75 in. BH HMX Shaped Charge
Part No.: 101270158 - Shaped charge for oilfield use
Summary Summary 2 IN HMX Pellet Assembly
Part No.: 100118425 - Pellet Assembly for use in Drill Collar Severing Tool.
Summary Summary 80 RDX LS
detotec - Tubing or wireline conveyed perforating systems to be employed at time and temperature (see graph) where explosive component interfaces may be affected.
Summary Summary Core Gun Load - Low Temp 600
Part No.: 100142075 - Core gun load for use in obtaining formation samples from bore hole.
Summary Summary 5 1/4 in. Junk Shot HMX Shaped Charge
Part No.: 100157003 - Shaped charge for oilfield use.
Summary Summary 7 3/4 in. Junk Shot HMX Shaped Charge
Part No.: 100157002 - Shaped charge for oilfield use.
Summary Summary 1.812 In. Pellet HMX SuperCutter
Part No.: 100158161 - Pellet Assembly for use in Drill Collar Severing Tool.
Summary Summary 4.625 in 6 SPF DP RDX Shaped Charge
Part No.: 101351945 - Shaped charge for oilfield use
Summary Summary 3.125 Mirage® HMX Shaped Charge
Part No.: 101351605 - Shaped charge for oilfield use
Summary Summary 5.5 in. OD Casing Cutter Pellet RDX
Part No.: 100158222 - Pellet for use in casing cutters.
Summary Summary 80 PETN WP PERFACORD
DETOTEC -
Summary Summary 4.625 IN. RDX BH Shaped Charge
Part No.: 100005319 - Shaped charge for oilfield use.
Summary Summary 4 in. 4 SPF SDP HMX Millennium®Shaped Charge
Part No.: 101210636 - Shaped charge for oilfield use
Summary Summary HMX Detonating Cord Initiator
Detonating cord initiator for oilfield use.
Summary Summary 3.5 In Mirage® HMX Shaped Charge
Part No.: 101542642 - Shaped charge for oilfield use
Summary Summary 4.750 in. HMX HP BH Shaped Charge
Part No.: 101787632 -4.750 in. HMX HP| BH| Shaped Charge for oilfield use
Summary Summary 2.875 In Dominator® HMX Shaped Charge
Part No.: 101414743 - 2.875 In Dominator® HMX Shaped Charge for oilfield use
Summary Summary 6.5 in Mirage™ RDX BH LD 47g Shaped Charge
101304878 - 6.5 in Mirage™| RDX| BH| LD| 47g Shaped Charge for oilfield use
Summary Summary 4 5/8 in. HMX DP Shaped Charge
Part No.: 100005327 - Shaped charge for oilfield use.
Summary Summary 3 3/8 in. HMX BH Shaped Charge
Part No.: 100005312 - Shaped charge for oilfield use.
Summary Summary 7 in Super Hole RDX 56.5 Grams Shaped Charge
101213474 - 7 in| Super Hole| RDX 56.5 Grams Shaped Charge for oilfield use
Summary Summary 1.812 In. Kit Tubing Cutter HMX SuperCutter
Part No.: 100008057 - Pipe cutter for severing tubing or casing for oil field pipe recovery operations| where well conditions prevent use of conventional tubing cutters.
Summary Summary 1.5625 in. Tubing Puncher
Part No.: 101434895 - 1.5625 in. Tubing Puncher for oilfield use
Summary Summary 5 inch Maxim® Dual String RDX 47 G Shaped Charge
101350449 -5 inch Maxim® Dual String RDX 47 G Shaped Charge for oilfield use
Summary Summary Charge Drop Bar Initiator Shaped Charge
Part No: 100005310 - Shaped charge for oilfield use.
Summary Summary 1.5625 IN SUPERCUTTER KIT WITH PELLETS
Part No.: 100118419 - Explosives Kit. Assembly Drill Collar Severing Tool.
Summary Summary 4 In RDX DP Slickwall Twisted Strip Shaped Charge
Part No. 101310802 - Shaped charge for oilfield use
Summary Summary 5-1/8 in HMX SH Shaped Charge
Part No.: 100157011 - Shaped charge for oilfield use.
Summary Summary 2.50 In 6SPF Millennium™II HMX Shaped Charge
Part No.: 101418095 - Shaped charge for oilfield use
Summary Summary 5” BH RDX Shaped Charge
Part No.: 101269719 - Shaped charge for oilfield use
Summary Summary 2 in. Sidewinder II HNS Shaped Charge
Part No.: 100157018 - Shaped charge for oilfield use.
Summary Summary 3-3/8 RDX BH Shaped Charge
Part No: 100005321 - Shaped Charge for oilfield use.
Summary Summary Venting Device Shaped Charge
Part No.: 100157043 - Shaped charge for oilfield use.
Summary Summary 3-3/8 in RDX BH Shaped Charge
Part No: 100008251 - Shaped Charge for oilfield use.
Summary Summary 4.625 in. 12SPF HNS DP Shaped Charge
Part No.: 101343830 - Shaped charge for oilfield use
Summary Summary 3.375 Time Delay Firing Head Assembly
Part No.: 100005230 - The Time Delay Firing head assembly permits underbalance/overbalance perforating through a pressure actuated firing head employing a time delay fuse.
Summary Summary Igniter Thermal Igniter RED® Go Style
Part No.: 101320910 - Electric detonator for oilfield use where RF silence is of concern.
Summary Summary 2.5 Time Delay Firing Head Assembly
Part No.: 100005231 - The Time Delay Firing head assembly permits underbalance/overbalance perforating through a pressure actuated firing head employing a time delay fuse.
Summary Summary 101206793-2.75 in. RDX BH Shaped Charge
Part No.: 101206793 - Shaped charge for oilfield use.
Summary Summary Detonator RED® Capsule Plug-in
Part No.: 101272600 - Electric detonator for oilfield use.
Summary Summary 1.562 Tubing Puncher
Part No.: 101434900 - 1.562 Tubing Puncher for oilfield use
Summary Summary 7 In. MIRAGE®18SPF BH Shaped Charge
Part No.: 101711688 - Shaped charge for oilfield use
Summary Summary 2.75 in MILLENNIUM®6SPF HMX SDPShaped Charge
Part No.: 101233817 - Shaped charge for oilfield use.
Summary Summary Diamondback shorty power charges
Part No.: 494028_494030_494031 - Diamondback Industries| Inc. - Diamondback shorty power charges
Summary Summary Mild Detonating Fuse Assy 1.375 In DCST-A S274-5
Part No.: 100118417 - Booster used in detonation train of perforating guns for oilfield use.
Summary Summary 2.875" Tubing 2.125" OD cutter
Part No.: 101290402_12.5Kpsi/400°F_1.4D UN0440
Summary Summary 8.625" Tubing 7.250" OD Cutter
Part No.: 101293553_8Kpsi/400°F_1.1D UN0059
Summary Summary 4.500" Drill Pipe 3.313" OD Cutter
Part No.: 100000140_12.5Kpsi/400°F_1.1D UN0059
Summary Summary 4.000" Tubing 2.938" OD Cutter
Part No.: 100127821_12.5Kpsi/400°F_1.1D UN0059
Summary Summary 2.875" Tubing 2.031" OD cutter
Part No.: 100000354_20Kpsi/400°F_1.4D UN0440
Summary Summary 6.625" - 7.000" Tubing 5.500" OD Cutter
Part No.: 101293515_9Kpsi/400°F_1.1D UN0059
Summary Summary 1.50" Coiled Tubing 1.188" OD Cutter
Part No.: 100000429 _ 10Kpsi/325°F_1.4D UN0440
Summary Summary 5.500" - 5.750" Tubing 4.750" OD Cutter
Part No.: 101293484_9Kpsi/400°F_1.1D UN0059
Summary Summary 2.875" Tubing 2.250" OD cutter
Part No.: 101290405_12.5Kpsi/400°F_1.4D UN0440
Summary Summary 2.375" Tubing 1.719" OD cutter
Part No.: 100000570_20Kpsi/400°F_1.4D UN0440
Summary Summary 1.75" - 1.90"" Coiled Tubing 1.375" OD Cutter
Part No.: 100000569 _ 10Kpsi/325°F_1.4D UN0440
Summary Summary 9.625" Tubing 8.188" OD Cutter
Part No.: 101293555_ 9.625" Tubing| 8.188" OD Cutter - 8Kpsi/400°F_1.1D UN0059
Summary Summary 7.625" Tubing 6.125" OD Cutter
Part No.: 101293544_9Kpsi/400°F_1.1D UN0059
Summary Summary 3.500" Tubing 2.594" OD Cutter
Part No.: 100116367_20Kpsi/400°F_1.4D UN0440
Summary Summary 2.875" Tubing 2.250" OD cutter
Part No.: 100000356_20Kpsi/400°F_1.4D UN0440
Summary Summary 1.25" Coiled Tubing .948" OD Cutter
Part No.: 100118389 _ 10Kpsi/325°F_1.4D UN0440
Summary Summary 2.375 in. Drill Pipe Cutter HMX
Part No.: 100116368
Summary Summary 7.000" Tubing 6.000" OD Cutter
Part No.: 101293536_9Kpsi/400°F_1.1D UN0059
Summary Summary 2.875" Tubing 2.125" OD cutter
Part No.: 100000430_20Kpsi/400°F_1.1D UN0059_Hastalloy
Summary Summary 2.875" Tubing 1.813" OD cutter
Part No.: 102012508_20Kpsi/400°F_1.4D UN0440
Summary Summary 2.375" Tubing 1.563" OD cutter
Part No.: 102012507_20Kpsi/400°F_1.4D UN0440
Summary Summary 2.875" Tubing 2.125" OD cutter
Part No.: 100000355_20Kpsi/400°F_1.4D UN0440
Summary Summary 3.125 In Millennium®DP HMX Shaped Charge
Part No.: 101366678 - Shaped charge for oilfield use
Summary Summary Igniter Thermol Igniter RED® Go Style 1.00 G
Igniter| Thermol Igniter| RED®| Go Style| 1.00 G part no. 102351326
Summary Summary 3.500" Tubing 2.500" OD Cutter
Part No.: 101290406_12.5Kpsi/400°F_1.4D UN0440
Summary Summary 5.500" Tubing 4.500" OD Cutter
Part No.: 100014494_9Kpsi/400°F_1.1D UN0059
Summary Summary 2.375" Tubing 1.813" OD cutter
Part No.: 101290400_12.5Kpsi/400°F_1.4D UN0440
Summary Summary 2.375" Tubing 1.813" OD cutter
Part No.: 100000353_20Kpsi/400°F_1.4D UN0440
Summary Summary 3.500" Tubing 2.700" OD Cutter
Part No.: 100000431_20Kpsi/400°F_1.1D UN0059_Hastalloy
Summary Summary 5.000" Tubing 4.000" OD Cutter
Part No.: 101293457_9Kpsi/400°F_1.1D UN0059
Summary Summary 3.500" Tubing 2.700" OD Cutter
Part No.: 100011034_20Kpsi/400°F_1.4D UN0440
Summary Summary 2.375" Tubing 1.688" OD cutter
Part No.: 101288527_12.5Kpsi/400°F_1.4D UN0440
Summary Summary 4.500" Tubing 3.300" OD Cutter
Part No.: 10.1293449_12.5Kpsi/400°F_1.1D UN0059
Summary Summary POWER CHARGE 2-1/2IN SHORTY HES HT
POWER CHARGE 2-1/2IN SHORTY HES HT
Summary Summary Fireline 8/40 RDX LS Ribbon - Dyno Nobel
DNX - Is specially processed ribbon detonating cord using "shrinkage resistant" construction components. Part No.: 101755963| 1000000149 and 101208988 - Det Cord for oilfield use
Summary Summary 5.000" Tubing 4.000" OD Cutter
Part No.: 101978737_9Kpsi/400°F_1.4D UN0352_Segmented
Summary Summary NONA BOOSTER 12.7MM 1.25 GRAMS
Part No.: 101653965 - Booster used in detonation train of perforating guns for oilfield use.
Summary Summary 6.625" - 7.000" Tubing 5.500" OD Cutter
Part No.: 101951863_9Kpsi/400°F_1.4D UN0352_Segmented
Summary Summary KIT, EXPLOSIVE & HARDWARE, CUTTER, SEGMENTED, 5.5 IN OD, HMX, 275.5G
101951863 - KIT| EXPLOSIVE & HARDWARE| CUTTER| SEGMENTED| 5.5 IN OD| HMX| 275.5G
Summary Summary 101272580-HMX Block Detonator (RED®) 1 Gr
101272580-HMX Block Detonator (RED®)| 1.0 Gr part no.101272580
Summary Summary 3.625 in. HMX Segmented Explosives Jet Cutter, 54.8g
101978736 - 3.625 in. HMX Segmented Explosives Jet Cutter| 54.8g
Summary Summary KIT, EXPLOSIVE & HARDWARE, CUTTER, SEGMENTED, 8.18 IN OD, HMX, 404.8G
101978744 - KIT| EXPLOSIVE & HARDWARE| CUTTER| SEGMENTED| 8.18 IN OD| HMX| 404.8G
Summary Summary 2.375" Tubing 1.688" OD cutter
Part No.: 100000352_20Kpsi/400°F_1.4D UN0440
Summary Summary 3.3125 in. HMX Segmented Explosives Jet Cutter Kit, 64.8G
101978734 - 3.3125 in. HMX Segmented Explosives Jet Cutter Kit| 64.8G
Summary Summary EXPLOSIVE & HARDWARE KIT, CUTTER, SEGMENTED, 7.25 IN OD, HMX, 421G
101978743 - KIT| EXPLOSIVE & HARDWARE| CUTTER| SEGMENTED| 7.25 IN OD| HMX| 421G
Summary Summary KIT, EXPLOSIVE & HARDWARE, CUTTER, SEGMENTED, 6.12 OD, HMX, 275.5G
101978742 - KIT| EXPLOSIVE & HARDWARE| CUTTER| SEGMENTED| 6.12 OD| HMX| 275.5G
Summary Summary KIT, EXPLOSIVE & HARDWARE, CUTTER, SEGMENTED, 4.75 IN, HMX, 114.28G
101978739 - KIT| EXPLOSIVE & HARDWARE| CUTTER| SEGMENTED| 4.75 IN| HMX| 114.28G
Summary Summary Bi-Directional Booster DYNAWELL HMX 1.4S
DYNAenergetics - Part No.: 2313244 - Temperature resistant bi-directional booster for oilfield use.
Summary Summary 102478439-HMX Block Detonator (RED®) 1 Gr
HMX Block Detonator (RED®)| 1.0 Grams Part no. 102478439
Summary Summary KIT, EXPLOSIVE & HARDWARE, CUTTER, SEGMENTED, 2.9375 IN OD, HMX, 56.9G
101978733 - KIT| EXPLOSIVE & HARDWARE| CUTTER| SEGMENTED| 2.9375 IN OD| HMX| 56.9G
Summary Summary KIT, EXPLOSIVE & HARDWARE, CUTTER, SEGMENTED, 4.5IN, HMX, 114.28G
101978738 - KIT| EXPLOSIVE & HARDWARE| CUTTER| SEGMENTED| 4.5IN| HMX| 114.28G
Summary Summary 101905821-HMX Block Detonator (RED®) FR
HMX Block Detonator (RED®) Fast Response part no 101905821
Summary Summary KIT, EXPLOSIVE & HARDWARE, CUTTER, SEGMENTED, 6.0 IN OD, HMX, 275.5G
101978741 - KIT| EXPLOSIVE & HARDWARE| CUTTER| SEGMENTED| 6.0 IN OD| HMX| 275.5G
Summary Summary Appendices (Det Cord Specs Gun Swell Data O-Ring Charts)
Appendix for JRC Catalog
Summary Summary Plugs and Setting Tools
Jet Research Center offers a variety of fieldproven| reliable plugs| setting tools| and associated equipment.
Summary Summary RF-safe & Resistor Type Detonators Detonator Cord Boosters
Jet Research Center’s explosive components have been designed using sound engineering principles and test procedures and are manufactured or selected with strict attention to quality and safety.
Summary Summary Pipe Recovery
Jet Research Center offers a variety of field-proven| reliable pipe recovery equipment to satisfy the high demands in the oilfield industry.
Summary Summary 7" MIRAGE 12/14 SPF SH/LD (TWISTLOCK)
Part No.: 101228037
Summary Summary 1-11/16" DYNA-STAR 6 SPF RDX DP
Part No.: 100005450 - 1-11/16" DYNA-STAR 6 SPF RDX DP
Summary Summary 6-1/2" MIRAGE 47 GRAM BH
Part No.: 101304878
Summary Summary 2-3/4" MILLENNIUM 15 GRAM HMX
Part No.: 101233817
Summary Summary 6-1/2" MIRAGE 12/14 SPF RDX BH HEAVY WALL
Part No.: 101304878
Summary Summary 4-5/8" 12 SPF HMX SH/LD
Part No.: 101233690
Summary Summary 5" MIRAGE 32 GRAM RDX SH
Part No.: 101307494
Summary Summary EX1997010142
U.S. DOT - Classification of explosives.
Summary Summary EX1997010044
U.S. DOT - Classification of explosives.
Summary Summary EX1997010145
U.S. DOT - Classification of explosives.
Summary Summary EX1997080094
U.S. DOT - Classification of explosives.
Summary Summary EX2004100104
U.S. DOT - Classification of explosives. EX2004100104
Summary Summary EX2008040073
U.S. DOT - Classification of explosives.
Summary Summary EX1996100098
U.S. DOT - Classification of explosives.
Summary Summary EX1983070056
U.S. DOT - Classification of explosives. EX1983070056.
Summary Summary EX1998070015
U.S. DOT - Classification of explosives.
Summary Summary EX1993090158- 2nd revision
U.S. DOT - Classification of explosives. EX1993090158- 2nd revision - FH CLASSIFICATION
Summary Summary EX1998100021
U.S. DOT - Classification of explosives.
Summary Summary EX1997010143
U.S. DOT - Classification of explosives.
Summary Summary EX1983080679
U.S. DOT - Classification of explosives. EX1983080679
Summary Summary EX2003070022
U.S. DOT - Classification of explosives. EX2003070022
Summary Summary EX2009110143
U.S. DOT - Classification of explosives.
Summary Summary EX2009100297
U.S. DOT - Classification of explosives.
Summary Summary EX1998070014
U.S. DOT - Classification of explosives.
Summary Summary EX2008040072
U.S. DOT - Classification of explosives.
Summary Summary Electric Detonators
Detonator.
Summary Summary Non-Electric Detonators-HMX
CE CERTIFICATE ENB/D/048 for Detonator. NON ELECTRIC DETONATORS| HMX
Summary Summary Tubing Cutters Field Loading Procedures
The JRC explosive jet cutters contain explosive compounds which are designed to explode when they receive| intentionally or unintentionally| stimuli capable of bringing the explosive compounds to detonation.
Summary Summary Casing Cutters Field Loading Procedures
The JRC explosive jet cutters contain explosive compounds which are designed to explode when they receive| intentionally or unintentionally| stimuli capable of bringing the explosive compounds to detonation.
Summary Summary Coiled Tubing and Small Tubing Cutter Loading Procedures
The JRC explosive jet cutters for coiled tubing and small tubing contain explosive compounds which are designed to explode when they receive| intentionally or unintentionally| stimuli capable of bringing the explosive compounds to detonation.
Summary Summary Segmented Explosive Jet Cutters
The Following Field Loading Instructions for Segmented Casing Cutter Tools Must be Explicitly Followed| Without Attempts to Shortcut| Alter| Switch or Otherwise Deviate In Any Way| or Use Alterate Parts From Those Intended to be Supplied by Jet Research Center for Such Field Assembly.
Summary Summary Drill Pipe Cutters Field Loading Procedures
The JRC explosive jet cutters contain explosive compounds which are designed to explode when they receive| intentionally or unintentionally| stimuli capable of bringing the explosive compounds to detonation.
Summary Summary 390 MaxForce for 4-5/8" Gun
Part No. 102054947
Summary Summary 4.625 Millennium II
Part No. 101702911
Summary Summary 4-5/8" OMNI 12 SPF RDX SUPER HOLE
Part No.: 100005311
Summary Summary 2-1/8" DYNA-STAR 6 SPF RDX DP
Part No.: 100005448
Summary Summary 4-5/8" 18 SPF RDX BH
Part No.: 100156990
Summary Summary 5" OMNI 12 SPF RDX SUPER HOLE (7" CASING)
Part No.: 100005311
Summary Summary 2" MILLENNIUM 6 SPF HMX
Part No.: 101208224
Summary Summary EX2002010272
U.S. DOT - Classification of explosives.
Summary Summary EX2002080050
U.S. DOT - Classification of explosives.
Summary Summary EX2002040363
U.S. DOT - Classification of explosives.
Summary Summary EX2004100102
U.S. DOT - Classification of explosives.
Summary Summary EX2002060166
U.S. DOT - Classification of explosives.
Summary Summary EX2003040091
U.S. DOT - Classification of explosives.
Summary Summary EX20020210271
U.S. DOT - Classification of explosives.
Summary Summary EX2003040198
U.S. DOT - Classification of explosives.
Summary Summary EX2002040362
U.S. DOT - Classification of explosives.
Summary Summary EX2002010273
U.S. DOT - Classification of explosives.
Summary Summary EX2001020254
U.S. DOT - Classification of explosives.
Summary Summary EX2007090098
U.S. DOT - Classification of explosives.
Summary Summary EX1987030043
U.S. DOT - Classification of explosives.
Summary Summary EX2003040197
U.S. DOT - Classification of explosives.
Summary Summary EX2002060007
U.S. DOT - Classification of explosives.
Summary Summary EX2001020253
U.S. DOT - Classification of explosives.
Summary Summary EX2002060008
U.S. DOT - Classification of explosives.
Summary Summary EX8703326
U.S. DOT - Classification of explosives.
Summary Summary EX2007040098
U.S. DOT - Classification of explosives.
Summary Summary EX2005050299
U.S. DOT - Classification of explosives.
Summary Summary EX2003120552
U.S. DOT - Classification of explosives.
Summary Summary EX2003080150
U.S. DOT - Classification of explosives.
Summary Summary EX2002040364
U.S. DOT - Classification of explosives.
Summary Summary EX2002060006
U.S. DOT - Classification of explosives.
Summary Summary EX2007050123
U.S. DOT - Classification of explosives.
Summary Summary EX9406082
U.S. DOT - Classification of explosives.
Summary Summary EX2002090260
U.S. DOT - Classification of explosives.
Summary Summary EX2010080111
U.S. DOT - Classification of explosives.
Summary Summary EX2002010274
U.S. DOT - Classification of explosives.
Summary Summary EX2002060005
U.S. DOT - Classification of explosives.
Summary Summary EX2007090099
U.S. DOT - Classification of explosives.
Summary Summary EX200120102
U.S. DOT - Classification of explosives.
Summary Summary EX2002060009
U.S. DOT - Classification of explosives.
Summary Summary MILLENNIUM Express 3-1/8 in. RDX Charges
Jet Research Center’s 3-1/8 in. MILLENNIUM™ Express RDX shaped charges joins its line of proven shaped charges to give you the MILLENNIUM charge performance you demand.
Summary Summary 210 MaxForce-FRAC Charge
The MaxFORCE Frac shaped charge breaks new ground in perforating technology by producing casing entry holes and perforation tunnels that greatly improve hydraulic fracturing efficiency.
Summary Summary MILLENNIUM Express 3-3/8 in. RDX Charges
Jet Research Center’s 3-3/8 in. MILLENNIUM™ Express RDX shaped charge joins its line of proven shaped charges to give you the MILLENNIUM charge performance you demand.
Summary Summary RED RF Safe Detonators
Perforating safety has long been a driving force within our industry since the introduction of explosives to well completion methods.
Summary Summary EX1987030045
U.S. DOT - Classification of explosives.
Summary Summary EX1984110191
U.S. DOT - Classification of explosives. EX1984110191
Summary Summary EX1987060030
U.S. DOT - Classification of explosives.
Summary Summary EX1987050471
U.S. DOT - Classification of explosives.
Summary Summary EX1987060128
U.S. DOT - Classification of explosives.
Summary Summary EX1988090125
U.S. DOT - Classification of explosives.
Summary Summary EX1983070055
U.S. DOT - Classification of explosives.
Summary Summary EX1986060138
U.S. DOT - Classification of explosives.
Summary Summary EX1987100311
U.S. DOT - Classification of explosives.
Summary Summary EX1989080258
U.S. DOT - Classification of explosives.
Summary Summary EX2010060666
U.S. DOT - Classification of explosives. EX2010060666
Summary Summary EX1987090016
U.S. DOT - Classification of explosives.
Summary Summary EX1990070084
U.S. DOT - Classification of explosives.
Summary Summary EX1992100065
U.S. DOT - Classification of explosives.
Summary Summary EX2004020380
U.S. DOT - Classification of explosives. EX2004020380
Summary Summary EX1983080059
U.S. DOT - Classification of explosives.
Summary Summary EX1983080672
U.S. DOT - Classification of explosives.
Summary Summary EX1983080676
U.S. DOT - Classification of explosives.
Summary Summary EX1992100187
U.S. DOT - Classification of explosives.
Summary Summary EX1983080680
U.S. DOT - Classification of explosives. EX1983080680
Summary Summary EX1988090126
U.S. DOT - Classification of explosives.
Summary Summary EX1983070053
U.S. DOT - Classification of explosives.
Summary Summary EX1988100097
U.S. DOT - Classification of explosives.
Summary Summary EX1983080060
U.S. DOT - Classification of explosives.
Summary Summary EX1983080605
U.S. DOT - Classification of explosives.
Summary Summary EX1983080604
U.S. DOT - Classification of explosives.
Summary Summary EX1983080062
U.S. DOT - Classification of explosives.
Summary Summary EX1983080637
U.S. DOT - Classification of explosives.
Summary Summary EX1983080050
U.S. DOT - Classification of explosives.
Summary Summary 4-5/8" OMNI 12 SPF HMX SUPER HOLE
Part No.: 100156995
Summary Summary 3-3/8" OMNI 12 SPF RDX BH
Part No.: 100008251
Summary Summary 3-3/8" 6 SPF RDX DP
Part No.: 100005333
Summary Summary 2-3/4" MILLENNIUM 15 GRAM HMX
Part No.: 101233817
Summary Summary 1-9/16" MILLENNIUM
Part No.: 100157028
Summary Summary 4" MILLENNIUM HMX SUPER DP 4SPF
Part No.: 101210636
Summary Summary 2-1/8" MILLENNIUM DEEP STAR HMX SUPER DP
Part No.: 101210198
Summary Summary 7" 12 SPF SH/LD (TWISTLOCK)
Part No.: 101212693
Summary Summary 1-9/16" 4 SPF HMX SUPER DP
Part No.: 100157028
Summary Summary 4" MILLENNIUM HMX SUPER DP 5SPF
Part No.: 101210636
Summary Summary 4" DP HNS 4SPF
Part No.: 101287306
Summary Summary 6-1/2" MIRAGE 47 GRAM RDX BH
Part No.: 101304878
Summary Summary 175 MaxForce for 4-5/8" Gun
Part No. 101826652
Summary Summary 7" 12/14 SPF RDX SH
Part No.: 101213474
Summary Summary 3-1/8" HMX MILLENNIUM
Part No.:101366678
Summary Summary 4-5/8" OMNI RDX BH/LD
Part No.: 100005326
Summary Summary 2-1/8" MILLENNIUM DEEP STAR
Part No.: 101210198
Summary Summary 3-3/8" MILLENNIUM 6 SPF HMX SUPER DP
Part No.: 101233819
Summary Summary 4-5/8" OMNI 12 SPF RDX BH
Part No.: 100005319
Summary Summary 3-3/8" HNS MILLENNIUM
Part No.: 101365876
Summary Summary 4*-1/2" MILLENNIUM
Part No.: 101210674
Summary Summary 4-5/8" 6 SPF RDX DP
Part No.: 100005322
Summary Summary 4" MILLENNIUM
Part No.: 101210636
Summary Summary 2-3/4" MILLENNIUM 6 SPF HMX
Part No.: 101233817
Summary Summary 7" MILLENNIUM 12SPF HMX
Part No.: 101207997
Summary Summary 4" HNS DP 5SPF
Part No.: 101287306
Summary Summary 7" 14 SPF RDX SUPER HOLE
Part No.: 101206796
Summary Summary 3-3/8" 6 SPF HMX SDP
Part No.: 100008249
Summary Summary 2-3/4" 6 SPF RDX SUPER HOLE
Part No.: 101206793
Summary Summary 4-5/8" OMNI 12 SPF RDX SUPER HOLE
Part No.: 100005311
Summary Summary 2 1/8 DYNA-STAR 0 DEG PH 4SPF RDX DP
PART NO. 100005448 - 2 1/8 DYNA-STAR 0 DEG PH 4SPF RDX DP
Summary Summary 2" 6 SPF HMX BH
Part No.: 101206246
Summary Summary 2" MAXFORCE 6SPF HMX
Part No: 101603801 - 7"
Summary Summary 2-3/4" 6 SPF HMX BH
Part No.: 101270158
Summary Summary 5" 21 SPF BH RDX
Part No.: 101292616
Summary Summary 7" 14 SPF RDX SUPER HOLE
Part No.: 101206796/101213474
Summary Summary 1-11/16" DYNA-STAR 6 SPF RDX DP
Part No.: 100005450
Summary Summary EX1999120055
U.S. DOT - Classification of explosives.
Summary Summary EX1986050102
U.S. DOT - Classification of explosives. -EX1986050102
Summary Summary EX2000090058
U.S. DOT - Classification of explosives.
Summary Summary EX1997030052
U.S. DOT - Classification of explosives.
Summary Summary EX2000090056
U.S. DOT - Classification of explosives.
Summary Summary EX1997010144
U.S. DOT - Classification of explosives.
Summary Summary EX1991110282
U.S. DOT - Classification of explosives.
Summary Summary EX2009020083
U.S. DOT - Classification of explosives. EX2009020083
Summary Summary EX1992030012
U.S. DOT - Classification of explosives.
Summary Summary EX1992020035
U.S. DOT - Classification of explosives.
Summary Summary EX2000050091
U.S. DOT - Classification of explosives.
Summary Summary EX1998030017
U.S. DOT - Classification of explosives.
Summary Summary EX2000020062
U.S. DOT - Classification of explosives.
Summary Summary EX1998050151A
U.S. DOT - Classification of explosives.
Summary Summary EX1999030158
U.S. DOT - Classification of explosives.
Summary Summary EX1991090189
U.S. DOT - Classification of explosives.
Summary Summary EX1998070016
U.S. DOT - Classification of explosives.
Summary Summary EX2000120102
U.S. DOT - Classification of explosives.
Summary Summary EX2000020063
U.S. DOT - Classification of explosives.
Summary Summary EX1999010232
U.S. DOT - Classification of explosives.
Summary Summary EX2000100120
U.S. DOT - Classification of explosives.
Summary Summary EX1998050065
U.S. DOT - Classification of explosives.
Summary Summary EX1992020037
U.S. DOT - Classification of explosives.
Summary Summary EX1999110038
U.S. DOT - Classification of explosives.
Summary Summary EX2001010211
U.S. DOT - Classification of explosives.
Summary Summary EX1991030132
U.S. DOT - Classification of explosives.
Summary Summary EX1992020036
U.S. DOT - Classification of explosives.
Summary Summary EX1987090134
U.S. DOT - Classification of explosives. EX1987090134
Summary Summary EX1999010230
U.S. DOT - Classification of explosives.
Summary Summary EX1996080028
U.S. DOT - Classification of explosives. EX1996080028
Summary Summary EX2000050029
U.S. DOT - Classification of explosives.
Summary Summary EX2000090040
U.S. DOT - Classification of explosives.
Summary Summary EX1996010024
U.S. DOT - Classification of explosives.
Summary Summary EX1996080031
U.S. DOT - Classification of explosives.
Summary Summary EX1993030175
U.S. DOT - Classification of explosives.
Summary Summary EX2008060097
U.S. DOT - Classification of explosives.
Summary Summary EX9409078
U.S. DOT - Classification of explosives.
Summary Summary EX1993040143
U.S. DOT - Classification of explosives.
Summary Summary EX2008040071
U.S. DOT - Classification of explosives.
Summary Summary EX1993100012
U.S. DOT - Classification of explosives.
Summary Summary EX9405290
U.S. DOT - Classification of explosives.
Summary Summary EX2006110356
U.S. DOT - Classification of explosives.
Summary Summary EX1993030180A
U.S. DOT - Classification of explosives.
Summary Summary EX1993030177
U.S. DOT - Classification of explosives.
Summary Summary EX1993030181
U.S. DOT - Classification of explosives.
Summary Summary EX9207009A
U.S. DOT - Classification of explosives.
Summary Summary EX1993100010
U.S. DOT - Classification of explosives.
Summary Summary EX2003050062
U.S. DOT - Classification of explosives. Z477 (PIN 101329124)
Summary Summary EX1996010025
U.S. DOT - Classification of explosives.
Summary Summary EX1993090180
U.S. DOT - Classification of explosives.
Summary Summary EX1993090115
U.S. DOT - Classification of explosives.