Explosive Devices - Jet Research Center®

Products & Services

Jet Research Center (JRC) originated and introduced jet perforating to the energy industry-forever changing the way oil and gas are produced. Located on more than 800 acres in Alvarado, Texas, JRC’s Explosive Products Center is a fully integrated research, engineering, testing and manufacturing plant that produces advanced perforating systems and specialty explosive devices for the oilfield, including shaped charge perforators, RF-protected detonators, tubing and casing cutters, severing tools, and platform removal charges.

Research and Engineering
JRC’s premier technical staff includes a balance of engineers, designers, and technicians, who are among the most knowledgeable experts in the perforating industry. Their backgrounds range from doctoral and Master’s level engineers to highly skilled explosive technicians-some with more than 25 years experience. We utilize the latest techniques and equipment in our design work, including:

  • sophisticated hydrocodes such as DYNA-2D and CTH that model the high strain rate deformations of materials subjected to explosive loading.
  • analytical computer programs that predict the response of structures to explosive impulse loads.
  • CHEETAH code for predicting state properties of reacting explosives and the resulting detonation products.

Filter By  
Количество записей на странице Show     results per page
  TitleНазвание  DateДата
Summary Summary 5.000" Tubing 4.000" OD Cutter
Part No.: 101978737_9Kpsi/400°F_1.4D UN0352_Segmented
Summary Summary KIT, EXPLOSIVE & HARDWARE, CUTTER, SEGMENTED, 5.5 IN OD, HMX, 275.5G
101951863 - KIT| EXPLOSIVE & HARDWARE| CUTTER| SEGMENTED| 5.5 IN OD| HMX| 275.5G
Summary Summary EX8507073 REYNOLDS
EX8507073 REYNOLDS
Summary Summary EX2009100297
U.S. DOT - Classification of explosives.
Summary Summary Hazardous Shipping Guide
Hazardous Shipping Guide
Summary Summary _Powder_Temp_charts
Explosive Powder Temp Charts
Summary Summary Quality, Health, Safety, Environmental & Security Policy
Jet Research Center, a division of Halliburton Energy Services, Inc. is committed to achieving the highest performance in Quality Assurance, HSE excellence and Customer Satisfaction within prescribe time frames and in accordance with all governmental rules and regulations in a safe and efficient manner without causing harm to our employees, the environment or to the communities in which we live and serve.
Summary Summary EX2004020046
U.S. DOT - Classification of explosives. EX2004020046
Summary Summary EX2006050012 - DIAMOND BACK IND SEC IGNITER
EX2006050012 - DIAMOND BACK IND SEC IGNITER
Summary Summary austin powder detonators EX0107065
austin powder detonators EX0107065
Summary Summary EX2009090093
U.S. DOT - Classification of explosives. EX2009090093
Summary Summary EX2011070175 - OOT
EX2011070175 - OOT
Summary Summary EX2010121109
U.S. DOT - Classification of explosives. EX2010121109
Summary Summary EX1992020035
U.S. DOT - Classification of explosives. EX1992020035
Summary Summary EX1996080028
U.S. DOT - Classification of explosives. EX1996080028
Summary Summary EX1995010044
U.S. DOT - Classification of explosives.
Summary Summary Detonator Cord - Jet Research
Detonator Cord in action
Summary Summary 3.375 In, HMX, DOMINATOR® 25 G Shaped Charge
Part No.: 101309223 - Shaped charge for oilfield use
Summary Summary GO Igniter Reclassified as RF-Safe
The purpose of this document is to inform all personnel of an update to the operational use of the JRC
Summary Summary 12.7 mm BOOSTER, HMX, THREADED
Part No.: 102782450 - Threaded booster used in detonation train for perforating guns for oilfield use.
Summary Summary HNS Resistorized Detonator Electric (D1210)
Part No.: 100010855 - 51 ohm resistorized electric detonator for oilfield use. Desensitized in fluid after 5 min.
Summary Summary 4.5 in 12 SPF MILLENNIUM® HMX SDP 22.7g Shaped Charge
Part No.: 101210674 - Shaped charge for oilfield use
Summary Summary 1.687 In Dyna-Star® RDX 12.5 g Capsule Shaped Charge
1.687 In Dyna-Star® RDX| 12.5 g| Capsule Shaped Charge for oilfield use
Summary Summary 12.7 mm BOOSTER, NONA, THREADED
Part No.: 102782451 - Threaded booster used in detonation train for perforating guns for oilfield use.
Summary Summary Baker Style #20 Slow Power Charge
PART NO.: BCP-1500-020 - Fiberboard tube containing a flammable energetic mix
Summary Summary BP-5S Primary Igniter
Primary igniter for oilfield applications used to initiate a secondary igniter or power charge.
Summary Summary 12.7 mm BOOSTER, NONA, THREADED
102782451 - 12.7 mm BOOSTER, NONA, THREADED
Summary Summary BP-3S Primary Igniter
Primary igniter for oilfield applications used to
Summary Summary IGNITER ASSEMBLY, VELOCITY, 3-1/8 IN, 2.95G
Part No.: 102751633 Velocity igniter for oilfield use.
Summary Summary DETONATOR ASSEMBLY, A-140F, VELOCITY, 3-1/8 IN, 0.49G
Velocity detonator for oilfield use.
Summary Summary Classification of Explosives - Second Revision
The ends of the detonating cord shall be sealed to prevent leakage of the
Summary Summary Jet Research Center Perforating Center of Excellence
Jet Research Center (JRC) is the leader in energetic research and testing for the oil and gas industry. JRC provides access to these facilities in an effort to expedite the development, testing, and qualification of emerging technologies and products. The following is an overview of some of the testing services and facilities available.
Summary Summary Technical Bulletin: DCST – DOT New Classification and Packaging Requirements
Bulletin Type: – OEB Number: – 2017/XXX Revision: – A
Summary Summary Drill Collar Severing Tool Field Loading Procedure
The Following Field Loading Instructions for Drill Collar Severing Tools Must be Explicitly Followed| Without Attempts to Shortcut| Alter| Switch or Otherwise Deviate In Any Way| or Use Alternate Parts From Those Intended to be Supplied by Jet Research
Summary Summary Position of Substantial Authority & High Risk Country Background Application
Position of Substantial Authority & High Risk Country Background Application
Summary Summary Closing-Instructions-102732069A
Closing-Instructions-102732069A
Summary Summary Closing-Instructions-101330987
Closing-Instructions-101330987
Summary Summary POP for box +CA2034 Jet Research Center
POP for box +CA2034 Jet Research Center
Summary Summary +CA0830 Box POP for 18 x 12 x 6.5
+CA0830 Box POP for 18 x 12 x 6.5
Summary Summary POP for box +CA0830 Jet Research Center
POP for box +CA0830 Jet Research Center
Summary Summary FIELD REWORK - 101214053 -TRAY LABEL .lbl
FIELD-REWORK-101214053-TRAY-LABEL
Summary Summary 101295856 -Cartridge TRAY LABEL.lbl
FIELD-REWORK-101293235-Cartridge-TRAY-LABEL
Summary Summary 100118426 -Cartridge TRAY LABEL.lbl
FIELD-REWORK-101293168-Cartridge-TRAY-LABEL
Summary Summary 101293161 -Cartridge TRAY LABEL.lbl
FIELD-REWORK-101293152-Cartridge-TRAY-LABEL
Summary Summary UN0444-CHARGES-AVERY-LABEL-8163
UN0444-CHARGES-AVERY-LABEL-8163
Summary Summary EX2016020739-AVERY-8366
EX2016020739-AVERY-8366
Summary Summary Shaped Charge Jet Perforators Performance Summary
Charge Performance data summary
Summary Summary 101015436 -Cartridge TRAY LABEL.lbl
FIELD-REWORK-101293234-Cartridge-TRAY-LABEL
Summary Summary 101293167 -TRAY LABEL.lbl
FIELD-REWORK-101293167-TRAY-LABEL
Summary Summary 101293207 -Cartridge TRAY LABEL.lbl
FIELD-REWORK-101293207-Cartridge-TRAY-LABEL
Summary Summary Jet Research Perforating Flow Lab
JRC Flow lab introduction with interviews
Summary Summary Wireline Setting Tools
Jet Research Center (JRC) offers a comprehensive family of setting tools that provide industry-trusted reliability for deployment and setting of conventional wellbore devices.
Summary Summary JRC Setting Tool GO™-Style Igniter
The Jet Research Center (JRC) now offers its GO™-style Setting Tool Igniter tested and qualified as RF - Safe for oilfield operations. The GO-style Igniter is used to initiate all explosive setting tools available from JRC and other manufacturers.
Summary Summary Slow motion test shot in pond
Test shot
Summary Summary 230 MaxForce®– FRAC RDX, 23 Grams Shaped Charge
Part No.: 102736069 - Shaped charge for oilfield use.
Summary Summary 150 MaxForce®– FRAC RDX 15 Grams Shaped Charge
Part No.: 102745134 - Shaped charge for oilfield use.
Summary Summary 230 MaxForce®– FRAC HMX 23 Grams Shaped Charge
Part No.: 102732983 - Shaped charge for oilfield use.
Summary Summary 150 MaxForce®– FRAC HMX 15 Grams Shaped Charge
Part No.: 102740045 - Shaped charge for oilfield use.
Summary Summary 210 MaxForce®– FRAC RDX 21 Grams Shaped Charge
210 MaxForce®– FRAC RDX 21 Grams Shaped Charge
Summary Summary 210 MaxForce®– FRAC HMX 21 Grams Shaped Charge
Part No.: 102127122 - Shaped charge for oilfield use.
Summary Summary Advanced Perforating Flow Laboratory - Maximize Production, Minimize Risk
Evaluate your perforation strategy at full downhole conditions, using the Advanced Perforating Flow Laboratory (APFL) at the Jet Research Center (JRC).
Summary Summary Shaped Charge Jet Perforators Performance Summary
Listing of shaped charges
Summary Summary ceramic-cut photo
ceramic-cut
Summary Summary Cast-Iron-Cutter Photo
Cast-Iron-Cutter
Summary Summary 102670829-Photo
102670829-Photo
Summary Summary Product Photo 100118417
Product Photo 100118417
Summary Summary Bridge Plug Setting Tool123
The JRC Bridge Plug Setting Tool uses an explosive igniter to safely and securely set a wide range of bridge plugs. The tool can be re-dressed and re-used for highly economical operations.
Summary Summary MILLENNIUM Express 3-1/8 in. RDX Charges
Jet Research Center’s 3-1/8 in. MILLENNIUM™ Express RDX shaped charges joins its line of proven shaped charges to give you the MILLENNIUM charge performance you demand.
Summary Summary 210 MaxForce-FRAC Charge
The MaxFORCE Frac shaped charge breaks new ground in perforating technology by producing casing entry holes and perforation tunnels that greatly improve hydraulic fracturing efficiency.
Summary Summary Pipe Recovery
Includes a complete listing and specifications for JRC tubing and casing cutters| coiled tubing cutters and drill collar severing tools.
Summary Summary Scalloped 3.125 4spf 90˚ Gun
Industry Standard Carriers.
Summary Summary MILLENNIUM Express 3-3/8 in. RDX Charges
Jet Research Center’s 3-3/8 in. MILLENNIUM™ Express RDX shaped charge joins its line of proven shaped charges to give you the MILLENNIUM charge performance you demand.
Summary Summary RED RF Safe Detonators
Perforating safety has long been a driving force within our industry since the introduction of explosives to well completion methods.
Summary Summary DeepStar Capsule Gun
The proven DeepStar system welcomes three new patent-pending phasings to the family — Pentaphase| Heptaphase and Octaphase.
Summary Summary Advanced Perforating Flow Laboratory - Optimizing Production
The Advanced Perforating Flow Laboratory at Jet Research Center (JRC) is an industry leader in perforating system research, development and test programs.. To meet our customers’ developing challenges, Jet Research Center expanded the Advanced Perforating Flow Lab with leading-edge vessels and technologies.
Summary Summary Appendices (Det Cord Specs Gun Swell Data O-Ring Charts)
Appendix for JRC Catalog
Summary Summary Capsule Guns
Jet Research Center’s offers a variety of Capsule Perforating Systems| which are generally used for underbalanced through-tubing perforating applications.
Summary Summary Vann Guns
The Vann scalloped gun system has a long history of field-proven reliability. The unique thread and o-ring design make it the right choice for the most extreme applications.
Summary Summary Table of Contents
Table of Contents for Jet Research Catalog
Summary Summary Plugs and Setting Tools
Jet Research Center offers a variety of fieldproven| reliable plugs| setting tools| and associated equipment.
Summary Summary Wireline Firing Systems & Ancillary Equipment
This section provides information concerning the most commonly used tools and adapters for through-tubing wireline operations and casing wireline operations.
Summary Summary TCP Systems
Jet Research Center’s firing systems and ancillary equipment products are intended to be safe| versatile| and modular| offering state-of-the-art TCP completion solutions that can be tailored to specific customer needs.
Summary Summary Slip On Guns
Jet Research Center offers a variety of tubing punchers for carrying out safe| effective workovers.
Summary Summary RF-safe & Resistor Type Detonators Detonator Cord Boosters
Jet Research Center’s explosive components have been designed using sound engineering principles and test procedures and are manufactured or selected with strict attention to quality and safety.
Summary Summary Scalloped Guns
Jet Research Center offers a variety of reliable scalloped gun perforating systems.
Summary Summary Pipe Recovery
Jet Research Center offers a variety of field-proven| reliable pipe recovery equipment to satisfy the high demands in the oilfield industry.
Summary Summary Ported Guns
Jet Research Center’s ported gun perforating systems provide users with economical| reusable guns for multipurpose applications.
Summary Summary 3 3/8 in. HMX BH Shaped Charge
Shaped charge for oilfield use.
Summary Summary 3.125” Millennium Express I.S. SDP RDX Shaped Charge
Part No.: 101618994 - 3.125” 6SPF Millennium®Express I.S.| SDP| RDX Shaped Charge for oilfield use
Summary Summary OIL STAR DETONATORS (A-161)
141442 OIL STAR DETONATORS (A-161)
Summary Summary CHARGE 4.625 IN +/- 10 DEG PH HMX KLEENZONE®
CHARGE| 4.625 IN| +/- 10 DEG PH| HMX| KLEENZONE® part no. 101466192
Summary Summary 9.625" Tubing 8.188" OD Cutter
Part No.: 101293555_ 9.625" Tubing| 8.188" OD Cutter - 8Kpsi/400°F_1.1D UN0059
Summary Summary 4.625 in. 12SPF HNS DP Shaped Charge
Part No.: 101343830 - Shaped charge for oilfield use
Summary Summary 2.625" HMX Pellet Assembly
Part No.: 101293160 - Pellet Assembly for use in Drill Collar Severing Tool.
Summary Summary 5.25 and 7.75 in. HMX Junk Shot Pellet
Part No.: 100118437 - Pellet for use in Junk Shot.
Summary Summary 3.125” BASIC HMX DP Shaped Charge Initiator Charge for Junk Shot assembly's 5.25" & 7.75"
Part No.: 101293561 - Shaped charge for oilfield use
Summary Summary 3.375 Time Delay Firing Head Assembly
Part No.: 100005230 - The Time Delay Firing head assembly permits underbalance/overbalance perforating through a pressure actuated firing head employing a time delay fuse.
Summary Summary 1.375 in. HMX Drill Collar Severing Tool Explosives Kit
part no. 101214053 - 1.375 in. HMX Drill Collar Severing Tool Explosives Kit
Summary Summary 5.75 in Maxim® Dual String RDX 56.5 g Shaped Charge
101357518 - 5.75 in Maxim® Dual String RDX 56.5 g Shaped Charge for oilfield use
Summary Summary 3.5 In Mirage® HMX Shaped Charge
Part No.: 101542642 - Shaped charge for oilfield use
Summary Summary FIRELINE 17/80 RDX
Is economical and used primarily in wireline conveyed perforator carriers where RDX range function capability (as detailed in the graph below) is required.
Summary Summary KIT CHG REL EASY PASS GUN HANGER HMX 6.9G
Part No.: 101340735 - KIT| CHG| REL| EASY PASS GUN HANGER|HMX|6.9G
Summary Summary PERF. 3 3/8" TAG S.D.P. RDXz
PERF. 3 3/8" TAG S.D.P. RDXz
Summary Summary IGNITER ASSEMBLY SETTING TOOL 2.95 G shipping as 1.4S
IGNITER ASSEMBLY| SETTING TOOL| 2.95 G shipping as 1.4S part no. 100004220
Summary Summary 3.375 in Millennium™ DP RDX 24G Shaped Charge
3.375 in Millennium™ DP RDX 24G Shaped Charge
Summary Summary 3.375 in. DP RDX Shaped Charge
3.375 in. DP RDX Shaped Charge part no. 100005333
Summary Summary PERF 1.562 in. CIRCULATION 0.750-0.875 in. HMX PAC
part no. 454608 - PERF 1.562 in. CIRCULATION 0.750-0.875 in. HMX| PAC
Summary Summary 3 3/8 in RDX SDP Shaped Charge
Part No: 100008014 - Shaped Charge for oilfield use.
Summary Summary 7.625" Tubing 6.125" OD Cutter
Part No.: 101293544_9Kpsi/400°F_1.1D UN0059
Summary Summary Igniter Assembly Core Gun 50 OHM
Williams Pyro| Inc - Resistance range shall be between 50-60 OHMS. The absolute minimum reading is 50 OHMS.
Summary Summary OilStar-A140f
DYNAenergetics - Part No.: OilStar-A140f
Summary Summary HMX BOOSTER 12.7 mm
Part No.: 101653762 - Booster used in detonation train of perforating guns for oilfield use.
Summary Summary 250 DOMINATOR® HNS 1001 25 G Shaped Charge
part no. 102326523 - 250 DOMINATOR® HNS 1001| 25 G Shaped Charge
Summary Summary Detonating Cord DYNAWELL HNS-CORD PT 250 HNS 1.4S
Part No.: 2315353 - Temperature and pressure resistant detonating cord for oilfield use. Not recommended for use with exposed gun systems.
Summary Summary KIT, EXPLOSIVE & HARDWARE, CUTTER, SEGMENTED, 6.12 OD, HMX, 275.5G
101978742 - KIT| EXPLOSIVE & HARDWARE| CUTTER| SEGMENTED| 6.12 OD| HMX| 275.5G
Summary Summary 4.625 in RDX 23 Gram DP Shaped Charge
4.625 in RDX 23 Gram DP Shaped Charge
Summary Summary 1.75 In Drill Collar Severing Tool HMX Explosives Kit 993.5 Grams
part no. 101293167
Summary Summary 3.500" Tubing 2.594" OD Cutter
Part No.: 100116367_20Kpsi/400°F_1.4D UN0440
Summary Summary 17/80 RDX LS
DNX - Is designed for tubing or wireline conveyed perforating systems (reference graph at left) where explosive component interfaces may be affected.
Summary Summary Percussion Primer CAD HTPI
Part No.: 101835255 - Percusion Primer for oilfield use
Summary Summary BI-DIRECTIONAL BOOSTER - HMX HES
BI-DIRECTIONAL BOOSTER - HMX HES
Summary Summary 4.750 in. HMX HP BH Shaped Charge
Part No.: 101787632 -4.750 in. HMX HP| BH| Shaped Charge for oilfield use
Summary Summary 2.875 In Dominator® HMX Shaped Charge
Part No.: 101414743 - 2.875 In Dominator® HMX Shaped Charge for oilfield use
Summary Summary 17/80 HMX LS XHV
dnx - Is designed for use in "high shot density" perforating systems where charge interference may be of concern and employs "shirnkage resistant" construction materials with a higher nominal velocity of detonation (+13% nominal VOD) thank standard HMX cord.
Summary Summary 2.875" Tubing 2.250" OD cutter
Part No.: 100000356_20Kpsi/400°F_1.4D UN0440
Summary Summary 1.688 in. Millennium Dyna Deep Star™ HMX Shaped Charge
Part No.: 101398891 - Shaped charge for oilfield use
Summary Summary 1.27 Grams HMX Metal Clad Booster Rod
Part No.: 100158153 - Pellet Assembly for use in Casing Cutter.
Summary Summary KIT, EXPLOSIVE & HARDWARE, CUTTER, SEGMENTED, 4.75 IN, HMX, 114.28G
101978739 - KIT| EXPLOSIVE & HARDWARE| CUTTER| SEGMENTED| 4.75 IN| HMX| 114.28G
Summary Summary Pellet Cartridge C4 22.7 Grams
Part No. 100141897 - C4 Cartridges for use in oil well casing cutter assemblies.
Summary Summary Fireline 17/80 HMX LS Exposed Det Cord
Part No.: 575874 - Det Cord for oilfield use
Summary Summary Igniter Thermal Igniter RED® Go Style
Part No.: 101320910 - Electric detonator for oilfield use where RF silence is of concern.
Summary Summary B00STER HNS 12.7MM 1.4 GRAM
Part No.: 101653763 - Booster used in detonation train of perforating guns for oilfield use.
Summary Summary 7 in. MIRAGE®HMX BH HW Shaped Charge
Part No.: 101836953 - Shaped charge for oilfield use.
Summary Summary 100157006- 4.625 in. Big Hole HMX 25 Gram Shaped Charge
100157006- 4.625 in. Big Hole HMX 25 Gram Shaped Charge
Summary Summary 230 MAXFORCE® - FRAC RDX, 23 Grams Shaped Charge
Part no. 102736069 - Shaped charge for oilfield use
Summary Summary 7 in. Mirage™18 SPF HMX BH Shaped Charge 40 g
101833421 -7 in. Mirage™18 SPF| HMX| BH Shaped Charge| 40 g
Summary Summary 1.6875 in. MaxForce® Deep Star™ HMX 8G Shaped Charge
1.6875 in. MaxForce® Deep Star™ HMX 8G Shaped Charge
Summary Summary 140 MaxForce® Flow HMX 14 gram Shaped Charge
140 MaxForce® Flow| HMX| 14 gram Shaped Charge
Summary Summary Percussion Primer Assembly - Pacific Scientific
Part No.: 116970 - Percusion Primer for oilfield use
Summary Summary JEC-5302-041-100007895.pdf
JEC-5302-041-100007895.pdf
Summary Summary Bi-Directional Booster DYNAWELL HMX 1.4S
DYNAenergetics - Part No.: 2313244 - Temperature resistant bi-directional booster for oilfield use.
Summary Summary 40 HMX LS PERFACORD
DETOTEC - Reduced dimension HMX textile detonating cord is designed using shrinkage resistant components.
Summary Summary CLCP Initiator Pacific Scientific
Part No.: 101785433 and 101804857 - Initiator for oilfield use
Summary Summary 102478439-HMX Block Detonator (RED®) 1 Gr
HMX Block Detonator (RED®)| 1.0 Grams Part no. 102478439
Summary Summary CORE GUN LOAD-HI TEMP 400 8.1G
Part no. 100004192 - CORE GUN LOAD-HI TEMP 400| 8.1G
Summary Summary 2.875 in. HMX Millennium™ 17.5g Shaped Charge
Part No.: 101388406 - 2.875 in. HMX Millennium™| 17.5g Shaped charge for oilfield use
Summary Summary Core Gun Load Assembly-Low Temp 500
Part No.: 100004190 - Core gun load for use in obtaining formation samples from bore hole.
Summary Summary xOwens Cutter CUT-8250-031
Part No.: 458623 - Shaped charge for oilfield use
Summary Summary Booster Rod 0.205 In OD x 1.46 In Long 0.95Gr HMX
Part No.: 100158223 Booster Rod| 0.205 In OD x 1.46 In Long| 0.95Gr HMX
Summary Summary 100157005-4.625 In DP HMX 15 Gram Shaped Charge
100157005-4.625 In DP HMX 15 Gram Shaped Charge
Summary Summary 2.5 Time Delay Firing Head Assembly
Part No.: 100005231 - The Time Delay Firing head assembly permits underbalance/overbalance perforating through a pressure actuated firing head employing a time delay fuse.
Summary Summary 1.25" Coiled Tubing .948" OD Cutter
Part No.: 100118389 _ 10Kpsi/325°F_1.4D UN0440
Summary Summary 390 MaxForce® HMX SDP Shaped Charge
390 MaxForce®| HMX| SDP| Shaped Charge
Summary Summary 224457-BAKER_#20 _SLOW_SET_POWER_CHARGE.xls
224457-BAKER_#20 _SLOW_SET_POWER_CHARGE.xls
Summary Summary 4.625 in Mirage™Super Hole HNS 28 grams Shaped Charge
101606857 - 4.625 in Mirage™Super Hole HNS 28 grams Shaped Charge for oilfield use
Summary Summary 7in Mirage® RDX Twistlock Super Hole 39 g Shaped Charge
Part No. 101228037 7in Mirage® RDX Twistlock Super Hole 39 g Shaped Charge
Summary Summary Diamondback Ind Baker Style #20 Standard Power Charge
Diamondback Ind Baker Style #20 Standard Power Charge
Summary Summary Owens cutter CUT-5750-062NT
Part No.: 354987 - Shaped charge for oilfield use
Summary Summary 3.375 in HMX Shaped Charge SDP for 2 in Chg Holder
100008249 - 3.375 in HMX Shaped Charge SDP for 2 in Chg Holder
Summary Summary 5 inch 12SPF SH RDX Shaped Charge Mirage®
Part No.: 101307494 - Shaped charge for oilfield use.
Summary Summary CORE GUN LOAD-HI TEMP 450 8.7 G
Part no. 100004186 - CORE GUN LOAD-HI TEMP 450| 8.7 G
Summary Summary 3.125” Millennium Express DP RDX Shaped Charge
Part No.: 101618998 - Shaped charge for oilfield use
Summary Summary Electric Initiation Device Selection Chart Resistorized Bridge ™ Detonators & Igniters
Owen Oil Tools - Owen Oil Tools recommends firing RB™ Detonators & Igniters by raising the current slowly from 0 to 1.0 Amp until detonator fires.
Summary Summary 6.5 in Mirage™ RDX BH LD 47g Shaped Charge
101304878 - 6.5 in Mirage™| RDX| BH| LD| 47g Shaped Charge for oilfield use
Summary Summary PYX INITIATOR - SPECIAL (PYX)
Part No.: 100014330 - PYX INITIATOR - SPECIAL (PYX)
Summary Summary High Temperature Percussion Detonator Oilfield Ordnance Device
Pacific Scientific - This is an oilfield percussion fired detonator used primarily for initiating detonation of oilfield tubing conveyed perforating guns.
Summary Summary 4.625 in. Kleenzone® HMX DP 180 39G Shaped Charge
Part No.: 101446899- Shaped charge for oilfield use. 4.625 in. Kleenzone® HMX DP|180| 39G Shaped Charge
Summary Summary 2.75 in HNS DP MILLENNIUM™Shaped Charge
Part No.: 101318485 - 2.75 in MILLENNIUM™|DP|HNS|15 G Shaped Charge for oilfield use
Summary Summary CORE GUN LOAD-HIGH TEMP 550 9.9G
Part no. 100071883 - CORE GUN LOAD-HIGH TEMP 550| 9.9G
Summary Summary CHARGE - 2.75 IN SDP HNS 15.1 GRAMS
CHARGE - 2.75 IN| SDP| HNS| 15.1 GRAMS part no. 101251723
Summary Summary RP-83 EBW Detonator RISI P/N 167-8676
RP-83 EBW Detonator RISI P/N 167-8676
Summary Summary 4 5/8 in. HMX DP Shaped Charge
Part No.: 100005327 - Shaped charge for oilfield use.
Summary Summary Substances, explosive, n.o.s. (Boron / Potassium nitrate pellets)
Secondary igniter for oilfield applications used to initiate a power charge.
Summary Summary 8/40 HMX LS
dnx - Is manufactured in the stardard round configuration (small dimensional) using “shrinkage resistant” construction components.
Summary Summary HMX Block Detonator (RED®) 0.94 Grams
Part no. 102321037 - HMX Block Detonator (RED®)| 0.94 Grams
Summary Summary 3 3/8 in. HMX BH Shaped Charge
Part No.: 100005312 - Shaped charge for oilfield use.
Summary Summary 2 in. Drill Collar Severing Tool HMX Explosives Kit 1.3404 KG
part no. 101293168
Summary Summary 6.5 in. Mirage® HMX BH Shaped Charge
Part No.: 101329124 - Shaped charge for oilfield use
Summary Summary HMX DETONATING CORD INITIATOR THREADED
HMX DETONATING CORD INITIATOR| THREADED part no. 100008252
Summary Summary 17/80 HMX LS
dnx - Is designed to be used in carrier-based perforating systems within HMX time and temperature operating ranges| where the jacket is protected or not exposed to pressure and/or fl uids.
Summary Summary 4.625 in. MILLENNIUM® II HMX 39G Shaped Charge
Part no. 101702911- 4.625 in. MILLENNIUM® II| HMX| 39G Shaped Charge
Summary Summary 175 Maxforce® HMX Shaped Charge
175 Maxforce® HMX Shaped Charge
Summary Summary Delay Element Oilfifeld Ordnance Device
Pacific Scientific - This is a pyrotechnic delay element| used to provide a period of time for manipulation of downhole pressure and then a detonation| used to initiate detonation of oilfield tubing conveyed perforating guns.
Summary Summary CORE GUN LOAD-HIGH TEMP 600 10.5G
Part no. 100142073 - CORE GUN LOAD-HIGH TEMP 600| 10.5G
Summary Summary 7 in. SH/LD RDX 56.5g Shaped Charge
101212693 - 7 in. SH/LD RDX 56.5g Shaped Charge - Shaped charge for oilfield use
Summary Summary 2.375 in. Drill Pipe Cutter HMX
Part No.: 100116368
Summary Summary 2.75 in. BH HMX Shaped Charge
Part No.: 101270158 - Shaped charge for oilfield use
Summary Summary CHG 2.375IN HMX 10 GRAMS BIG HOLE
Part No.: 101591373 - Shaped charge for oilfield use
Summary Summary 4 In Millennium® Basic DP RDX Shaped Charge
Part No.: 101204537- 4 In Millennium™ Basic| DP| RDX|19.5G| Shaped charge for oilfield use
Summary Summary 4.625 in. MILLENNIUM® II HMX 5SPF Shaped Charge
Part No.: 101702911 - Shaped charge for oilfield use
Summary Summary 101206793-2.75 in. RDX BH Shaped Charge
Part No.: 101206793 - Shaped charge for oilfield use.
Summary Summary 2 IN HMX Pellet Assembly
Part No.: 100118425 - Pellet Assembly for use in Drill Collar Severing Tool.
Summary Summary TUBING CUTTER - 1.562 IN SUPERCUTTER
HMX PELLET WITH TUBING CUTTER - 1.562 IN SUPERCUTTER
Summary Summary 3-3/8 in Millennium HNS Shaped Charge
Part No.: 101365876
Summary Summary DET CORD - 40 GR/FT HMX LS - RIBBON
DET CORD - 40 GR/FT HMX LS - RIBBON part no. 100000363 and 101205518
Summary Summary 3.375 in Millennium®SDPHMX Shaped Charge
Part No.: 101233819 - Shaped charge for oilfield use CHARGE - 3.375 IN MILLENIUM®| SDP| HMX
Summary Summary 3.375 in Millennium® Express I.S. DP RDX 23g Shaped Charge
3.375 in| Millennium® Express I.S. DP RDX 23g Shaped Charge
Summary Summary Ballistic Transfer 1.85 Gram HMX Shaped Charge
101602465 - Ballistic Transfer 1.85 Gram HMX Shaped Charge
Summary Summary 7.000" Tubing 6.000" OD Cutter
Part No.: 101293536_9Kpsi/400°F_1.1D UN0059
Summary Summary 7 in Super Hole RDX 56.5 Grams Shaped Charge
101213474 - 7 in| Super Hole| RDX 56.5 Grams Shaped Charge for oilfield use
Summary Summary DETONATOR UTILITY (18" LEADS)
DETONATOR| UTILITY (18" LEADS)
Summary Summary 26 Detonating Cord DYNAWELL Octocord PT 165 1.4S IK10026AC.
160257 - 26 Detonating Cord DYNAWELL Octocord PT 165 1.4S IK10026AC.
Summary Summary 220 MaxForce® FLOW BH HMX Shaped Charge
220 MaxForce® FLOW| BH| HMX Shaped Charge
Summary Summary KIT, EXPLOSIVE & HARDWARE, CUTTER, SEGMENTED, 2.9375 IN OD, HMX, 56.9G
101978733 - KIT| EXPLOSIVE & HARDWARE| CUTTER| SEGMENTED| 2.9375 IN OD| HMX| 56.9G
Summary Summary 101653763-Closing-Instru
101653763-Closing-Instructions
Summary Summary Core Gun Load - Low Temp 600
Part No.: 100142075 - Core gun load for use in obtaining formation samples from bore hole.
Summary Summary 1.812 In. Kit Tubing Cutter HMX SuperCutter
Part No.: 100008057 - Pipe cutter for severing tubing or casing for oil field pipe recovery operations| where well conditions prevent use of conventional tubing cutters.
Summary Summary 2.625 in High Temp HNS DCST 2.5 KG Explosives Kit
part no. 101293235
Summary Summary 280 Maxforce® FLOW HMX LD Shaped Charge
280 Maxforce® FLOW| HMX| LD Shaped Charge
Summary Summary 4 in Millennium™ RDX 39g Shaped Charge
Part No.: 101355271 - 4 in Millennium™ RDX 39g Shaped Charge
Summary Summary TUBING CUTTER 2-1/4IN HMX
TUBING CUTTER 2-1/4IN HMX
Summary Summary 5 1/4 in. Junk Shot HMX Shaped Charge
Part No.: 100157003 - Shaped charge for oilfield use.
Summary Summary 7 in. 15SPF MIRAGEHMX BH Shaped Charge
Part No.: 101716920 - Shaped charge for oilfield use
Summary Summary Detonator RED® Capsule Plug-in
Part No.: 101272600 - Electric detonator for oilfield use.
Summary Summary 7 3/4 in. Junk Shot HMX Shaped Charge
Part No.: 100157002 - Shaped charge for oilfield use.
Summary Summary 4.625 Millennium II HMX 39G Shaped Charge
part no. 102624465
Summary Summary DIAMOND BACK CHARGES.xlsx
Part No.: 494031_HDO-3500-100 DIAMONDBACK IND.
Summary Summary 1.562 Tubing Puncher
Part No.: 101434900 - 1.562 Tubing Puncher for oilfield use
Summary Summary 2.375 in. MAXFORCE® HMX Shaped Charge
2.375 in. MAXFORCE® HMX Shaped Charge
Summary Summary 7 In 18SPF Mirage Big Hole HMX Shaped Charge
Part No.: 101414821 - Shaped charge for oilfield use
Summary Summary 1.812 In. Pellet HMX SuperCutter
Part No.: 100158161 - Pellet Assembly for use in Drill Collar Severing Tool.
Summary Summary 2.875" Tubing 2.125" OD cutter
Part No.: 100000430_20Kpsi/400°F_1.1D UN0059_Hastalloy
Summary Summary 2.875" Tubing 1.813" OD cutter
Part No.: 102012508_20Kpsi/400°F_1.4D UN0440
Summary Summary 390 MaxForce® FLOW Ultra Low Debris Steel - HMX
390 MaxForce® FLOW| Ultra Low Debris Steel - HMX| Shaped Charge
Summary Summary RISI EBW SUPPLIED THROUGH OWEN OIL TOOLS
RISI EBW SUPPLIED THROUGH OWEN OIL TOOLS
Summary Summary HIGH TEMPERATURE PERCUSSION DETONATOR-PACIFIC SCIENTIFIC
102105426 - 51-1965-4 HIGH TEMPERATURE PERCUSSION DETONATOR-PACIFIC SCIENTIFIC
Summary Summary 2.375" Tubing 1.563" OD cutter
Part No.: 102012507_20Kpsi/400°F_1.4D UN0440
Summary Summary 2 in. Drill Collar Severing Tool HNS Explosive Kit 1.3466 Kg
part no. 101293234
Summary Summary KIT, EXPLOSIVE & HARDWARE, CUTTER, SEGMENTED, 4.5IN, HMX, 114.28G
101978738 - KIT| EXPLOSIVE & HARDWARE| CUTTER| SEGMENTED| 4.5IN| HMX| 114.28G
Summary Summary 2.875 in. G-FORCE® HNS DP 10.5 G Shaped Charge
Part no. 102322181 - 2.875 in. G-FORCE® HNS DP 10.5 G Shaped Charge
Summary Summary 40 HMX LS RIBBON PERFACORD
DETOTEC - Special production techniques produce HMX ribbon textile detonating cord.
Summary Summary 390 MaxForce® FLOW ZINC-HMX Shaped Charge
390 MaxForce® FLOW| ZINC-HMX Shaped Charge
Summary Summary POWER CHARGE - 3-1/2IN SHORTY LT
POWER CHARGE - 3-1/2IN SHORTY LT
Summary Summary 7 In. MIRAGE®18SPF BH Shaped Charge
Part No.: 101711688 - Shaped charge for oilfield use
Summary Summary 4.625 in 6 SPF DP RDX Shaped Charge
Part No.: 101351945 - Shaped charge for oilfield use
Summary Summary Electronic Detonator DYNAWELL 0026 FDE HNS 1.4S
102111495 - Electronic Detonator DYNAWELL 0026 FDE HNS 1.4S - part no. 2466597
Summary Summary 2.875" Tubing 2.125" OD cutter
Part No.: 100000355_20Kpsi/400°F_1.4D UN0440
Summary Summary 3.125 In Millennium®DP HMX Shaped Charge
Part No.: 101366678 - Shaped charge for oilfield use
Summary Summary Core Gun Load-Low Temp 550
Core gun load for use in obtaining formation samples from bore hole.
Summary Summary Fluid Disabled Resistorized RDX Detonator
Part No.: 219192 - Electric Det for oilfield use
Summary Summary 220 Maxforce® FLOW BH HMX ZINC Shaped Charge
220 Maxforce® FLOW| BH| HMX| ZINC Shaped Charge
Summary Summary DETONATING FUZE ASSEMBLY HMX 0.1 G
DETONATING FUZE ASSEMBLY| HMX| 0.1 G part no. 100011558
Summary Summary 434199FD-6297-082F1C.pub
195364_OilStar-A96L
Summary Summary 40 RDX LS PERFACORD
DETOTEC - Reduced dimension RDX textile detonating cord is produced using shrinkage resistant components.
Summary Summary 4.625 In. Super Hole HMX 28g Shaped Charge
4.625 In. Super Hole HMX 28g Shaped Charge part no. 100156995
Summary Summary HNS Resistorized Detonator (Top Fire® )
Part No.: 101007855 - 51 ohm resistorized electric detonator for oilfield use. Desensitized in fluid after 5 min.
Summary Summary Igniter Thermol Igniter RED® Go Style 1.00 G
Igniter| Thermol Igniter| RED®| Go Style| 1.00 G part no. 102351326
Summary Summary 1.5625 in. Tubing Puncher
Part No.: 101434895 - 1.5625 in. Tubing Puncher for oilfield use
Summary Summary 5 inch Maxim® Dual String RDX 47 G Shaped Charge
101350449 -5 inch Maxim® Dual String RDX 47 G Shaped Charge for oilfield use
Summary Summary Charge Drop Bar Initiator Shaped Charge
Part No: 100005310 - Shaped charge for oilfield use.
Summary Summary 2.75 in MILLENNIUM®6SPF HMX SDPShaped Charge
Part No.: 101233817 - Shaped charge for oilfield use.
Summary Summary 4” Millennium® GSC STD WSHR RDX DP Shaped Charge
Part No.: 101288857 - Shaped charge for oilfield use
Summary Summary 3.125 In MILLENNIUM® DP HNS 21 G Shaped Charge
part no. 102322540 - 3.125 In MILLENNIUM® DP HNS 21 G Shaped Charge
Summary Summary CHG 230 MAXFORCE® - FRAC HMX 23 GRAM
part no. 102732983
Summary Summary 1.5625 IN SUPERCUTTER KIT WITH PELLETS
Part No.: 100118419 - Explosives Kit. Assembly Drill Collar Severing Tool.
Summary Summary Diamondback shorty power charges
Part No.: 494028_494030_494031 - Diamondback Industries| Inc. - Diamondback shorty power charges
Summary Summary Shaped Charge DYNAWELL 39g DP2 St
Shaped Charge DYNAWELL 39g DP2 St part no. 102108786
Summary Summary 3.500" Tubing 2.500" OD Cutter
Part No.: 101290406_12.5Kpsi/400°F_1.4D UN0440
Summary Summary 330 MaxForce® Steel-HMX Shaped Charge
Part no. 101972806 - 330 MaxForce®| Steel-HMX Shaped Charge
Summary Summary Slim Output Delay Oil Field Ordnance Device
Pacific Scientific - This is a pyrotechnic delay element| used to provide a time for manipulation of downhole pressure and then a detonation| used to initiate detonation of oilfield tubing conveyed perforating guns.
Summary Summary Nona Detonating Cord Initiator Threaded
Part No.: 100156999 - Detonating Cord Initiator used in detonation train of perforating guns for oilfield use.
Summary Summary 4 In RDX DP Slickwall Twisted Strip Shaped Charge
Part No. 101310802 - Shaped charge for oilfield use
Summary Summary 2.0 in. Millennium®SDPHMX Shaped Charge
Part No.: 101208224- Shaped charge for oilfield use
Summary Summary 2” MaxForce® HMX DP 7 Gram Shaped Charge
2” MaxForce® HMX| DP| 7 Gram Shaped Charge
Summary Summary 101905821-HMX Block Detonator (RED®) FR
HMX Block Detonator (RED®) Fast Response part no 101905821
Summary Summary 4.62 in. HNS DP 32 Gram Shaped Charge
4.62 in. HNS| DP| 32 Gram Shaped Charge
Summary Summary 3.125 Mirage® HMX Shaped Charge
Part No.: 101351605 - Shaped charge for oilfield use
Summary Summary 4.625 in. OMNI™ HMX DP Steel 23 g Shaped Charge
100014352 - 4.625 in. OMNI™ HMX DP| Steel| 23 g Shaped Charge| EX1996080028| CE0519| ENB/B/036| HES-APRV-004
Summary Summary CHARGE 4.625 HMX SH ZINC CASE 28 GR
Part No.: 101233690 - CHARGE 4.625| HMX SH| ZINC CASE| 28 GR
Summary Summary 3.375 in 6SPF Millennium® Express I.S. DP RDX 23g Shaped Charge
Part No.: 101600039 - 3.375 in 6SPF| Millennium® Express I.S. DP RDX 23g Shaped Charge
Summary Summary 4.625 in. Super BH RDX 28 Grams Shaped Charge
100005311 - 4.625 in. Super BH| RDX 28 Grams Shaped Charge| CE0519| ENB/B/035| EX1996080028| HES-APRV-004
Summary Summary 5.5 in. OD Casing Cutter Pellet RDX
Part No.: 100158222 - Pellet for use in casing cutters.
Summary Summary Mild Detonating Fuse Assy 1.375 In DCST-A S274-5
Part No.: 100118417 - Booster used in detonation train of perforating guns for oilfield use.
Summary Summary 5.500" Tubing 4.500" OD Cutter
Part No.: 100014494_9Kpsi/400°F_1.1D UN0059
Summary Summary 2.625 In Drill Collar Severing Tool Explosives Kit
Part No.: 100158152 2.625 In Drill Collar Severing Tool Explosives Kit for use with 1.375 In MDF
Summary Summary 227 DP RDX Shaped Charge
102097267 - 227| DP| RDX Shaped Charge
Summary Summary Venting Device Shaped Charge HNS
Part No.: 101288565 - Shaped charge for oilfield use
Summary Summary 5.75 in Maxim® Dual String Zinc Case RDX 56.5 g Shaped Charge
5.75 in Maxim® Dual String| Zinc Case| RDX 56.5 g Shaped Charge part no. 102184167
Summary Summary 2.375" Tubing 1.813" OD cutter
Part No.: 101290400_12.5Kpsi/400°F_1.4D UN0440
Summary Summary DIAMOND BACK CHARGES.xlsx
Part No.: 494030_HDO-2500-200 DIAMONDBACK IND.
Summary Summary KIT, EXPLOSIVE & HARDWARE, CUTTER, SEGMENTED, 6.0 IN OD, HMX, 275.5G
101978741 - KIT| EXPLOSIVE & HARDWARE| CUTTER| SEGMENTED| 6.0 IN OD| HMX| 275.5G
Summary Summary A-105-100
Austin Powder Company - High Pressure Resistorized Instantaneous RDX Detonator
Summary Summary 5-1/8 in HMX SH Shaped Charge
Part No.: 100157011 - Shaped charge for oilfield use.
Summary Summary Kit Easy Pass Gun Hanger Release 6.9g HNS Shaped Charge
Part No.: 101343699 - Kit| Easy Pass Gun Hanger Release 6.9g HNS Shaped Charge
Summary Summary 2.375" Tubing 1.813" OD cutter
Part No.: 100000353_20Kpsi/400°F_1.4D UN0440
Summary Summary 3.500" Tubing 2.700" OD Cutter
Part No.: 100000431_20Kpsi/400°F_1.1D UN0059_Hastalloy
Summary Summary Percussion Initiator
Fike - The Fike Percussion Initiators are percussion fired initiators for use in downhole oil and gas completion operations.
Summary Summary NONA BOOSTER 12.7MM 1.25 GRAMS
Part No.: 101653965 - Booster used in detonation train of perforating guns for oilfield use.
Summary Summary 5.000" Tubing 4.000" OD Cutter
Part No.: 101293457_9Kpsi/400°F_1.1D UN0059
Summary Summary 101330987-7 in. 12/14 SPF HMX SH 56.5 Gram Shaped Charge
101330987-7 in. 12/14 SPF| HMX| SH| 56.5 Gram Shaped Charge
Summary Summary 2.125 in. Dyna Star® RDX Charge
Part No.: 100005448 - Shaped charge for oilfield use.
Summary Summary 210 MaxForce®– FRAC HMX 21 Grams Shaped Charge
210 MaxForce®– FRAC HMX 21 Grams Shaped Charge part no. 102127122
Summary Summary Bi-Directional Booster DYNAWELL HNS 1.4S
dynaenergetics - Part No.: 2313245 - Temeperature resistant bi-directional booster for oilfield use.
Summary Summary DET CORD-40 GR/FT ROUND-HMX
DET CORD-40 GR/FT ROUND-HMX part no. 123995
Summary Summary 3.500" Tubing 2.700" OD Cutter
Part No.: 100011034_20Kpsi/400°F_1.4D UN0440
Summary Summary detotec 40grain rdx_LS.html
part no. 101701576
Summary Summary 80 PETN WP PERFACORD
DETOTEC -
Summary Summary 3.375 Time Delay Firing Head Assy HNS 6 minute
Part no. 101837823 3.375 Time Delay Firing Head Assy| HNS| 6 minute
Summary Summary 2.375" Tubing 1.688" OD cutter
Part No.: 101288527_12.5Kpsi/400°F_1.4D UN0440
Summary Summary Classification of Explosives - First Revision
U.S. DOT - Classification of explosives EX2010060587
Summary Summary EX2015030653-Baker-Hughes
U.S. DOT - Classification of explosives -EX2015030653-Baker-Hughes
Summary Summary EX2009100299
U.S. DOT - Classification of explosives - EX2009100299
Summary Summary EX1987030044
U.S. DOT - Classification of explosives.
Summary Summary EX2003080150
U.S. DOT - Classification of explosives.
Summary Summary product photo 101521848
product photo 101521848
Summary Summary Product Photo 102350510
Product Photo 102350510
Summary Summary Product Photo 100000432
Product Photo 100000432
Summary Summary Product Photo 102351326
Product Photo 102351326
Summary Summary Tubing Cutters Field Loading Procedures
The JRC explosive jet cutters contain explosive compounds which are designed to explode when they receive| intentionally or unintentionally| stimuli capable of bringing the explosive compounds to detonation.
Summary Summary Casing Cutters Field Loading Procedures
The JRC explosive jet cutters contain explosive compounds which are designed to explode when they receive| intentionally or unintentionally| stimuli capable of bringing the explosive compounds to detonation.
Summary Summary Coiled Tubing and Small Tubing Cutter Loading Procedures
The JRC explosive jet cutters for coiled tubing and small tubing contain explosive compounds which are designed to explode when they receive| intentionally or unintentionally| stimuli capable of bringing the explosive compounds to detonation.
Summary Summary Segmented Explosive Jet Cutters
The Following Field Loading Instructions for Segmented Casing Cutter Tools Must be Explicitly Followed| Without Attempts to Shortcut| Alter| Switch or Otherwise Deviate In Any Way| or Use Alterate Parts From Those Intended to be Supplied by Jet Research Center for Such Field Assembly.
Summary Summary Drill Pipe Cutters Field Loading Procedures
The JRC explosive jet cutters contain explosive compounds which are designed to explode when they receive| intentionally or unintentionally| stimuli capable of bringing the explosive compounds to detonation.
Summary Summary Elite Magna-Range Bridge Plug
The Elite Magna-Range Bridge Plug is a specialty plug designed to run through tubing or restricted pipe and set in the larger tubing or casing below the restricted interval.
Summary Summary Jet Research Center Facility
Jet Research Center originated and introduced jet perforating to the energy industry| forever changing the way oil and gas are produced.
Summary Summary 102358398_Closing_Instr
102358398_Closing_Instr
Summary Summary AQ1809-closing_instructions_100000354.xls
AQ1809-closing_instructions_100000354
Summary Summary CLOSING-INSTRUCTION-FOR-CA0720
CLOSING-INSTRUCTION-FOR-CA0720
Summary Summary +CA0942 Jet Research Center
Summary Summary PACIFIC SCIENTIFIC OILFIELD NON DETONATING DELAYS
0080-EXP-03-0044 -PACIFIC SCIENTIFIC OILFIELD NON DETONATING DELAYS
Summary Summary ENB/B/035 RDX Open-Faced Shaped Charges
ENB/B/035 RDX Open-Faced Shaped Charges
Summary Summary Closing-Instructions-102624465
Closing-Instructions-102624465
Summary Summary CA0908
CA0908
Summary Summary Electric Detonators
Detonator.
Summary Summary PRESSED PELLETS OF HMX
CE CERTIFICATE ENB/B/022 PRESSED PELLETS OF HMX
Summary Summary 100005326G_closing_Inst
100005326G_closing_Inst
Summary Summary Closing-Instr-BOX-102358399
Closing-Instr-BOX-102358399
Summary Summary Segmented Casing Cutters
Shaped charge.
Summary Summary CE MARK 0080-EXP-12-0013
CE MARK 0080-EXP-12-0013
Summary Summary +CA0950 Jet Research Center
+CA0950 Jet Research Center
Summary Summary AQ1809-closing_instructions_100000353.xls
AQ1809-closing_instructions_100000353.
Summary Summary Detotec
Detotec Det Cord CE MARK
Summary Summary Tubing Cutters
Shaped charge.
Summary Summary ENB/B/173 HMX SEGMENTED CUTTER KITS
ENB/B/173 HMX SEGMENTED CUTTER KITS
Summary Summary +CA0940 Jet Research Center
+CA0940 Jet Research Center
Summary Summary Tubing Cutters-HMX
High (Blasting) explosive.
Summary Summary DynaEnergetics BiDi boosters
DynaEnergetics BiDi boosters 0080_EXP_98_0027
Summary Summary Rig Environment Detonators
RED Detonator CE MARK
Summary Summary 101293168 CLOSING INSTRUCTIONS
101293168 CLOSING INSTRUCTIONS
Summary Summary AQ1813 bom and closure instructions FIELD.xls
AQ1813 bom and closure instructions FIELD.xls
Summary Summary AQ1809_Packaging_and_Closing_Instructions.pdf
AQ1809_Packaging_and_Closing_Instructions.pdf
Summary Summary +CA0801 Jet Research POP for box
+CA0801 Jet Research POP for box
Summary Summary Tisk fotografií na celou stránku - Austin Powder detonator A-96L
Tisk fotografií na celou stránku - Austin Powder detonator A-96L
Summary Summary closing-instructions for Detonator box
closing-instructions for Detonator box
Summary Summary 0080_EXP_03_0040 - PacSci TDF
0080_EXP_03_0040 - PacSci TDF
Summary Summary RISI EBW CE MARK DOCUMENTS 0080.EXP.03.0006
RISI EBW CE MARK DOCUMENTS 0080.EXP.03.0006
Summary Summary 101313437-closing-instructions
101313437-closing-instructions
Summary Summary HNS Cord PT 250
Detonating cord.
Summary Summary CE mark Certificate for A140 det
Part No.: 219192- Detonator for oilfield use
Summary Summary 0080.EXP.03.0046 - PacSci Percussion Init
0080.EXP.03.0046 - PacSci Percussion Init
Summary Summary CE Type 1502
Shaped charge.
Summary Summary CE Mark ENB-B-036
CE mark certificate
Summary Summary POP FOR BOXES CA0676
POP FOR BOXES CA0676
Summary Summary PACIFIC SCIENTIFIC OILFIELD PERCUSSION DET CE DOCS
0080-EXP-03-0045. -PACIFIC SCIENTIFIC OILFIELD PERCUSSION DET CE DOCS
Summary Summary Non-Electric Detonators-NONA
Detonator.
Summary Summary BI Directional Booster Z 909
Detonating booster.
Summary Summary RDX Capsule Charges
High (Blasting) explosive.
Summary Summary 101293167 CLOSING INSTRUCTIONS
101293167 CLOSING INSTRUCTIONS
Summary Summary RISI
RISI - 0080_EXP_03_0007. CE MARK
Summary Summary DiamondBack ind
DiamondBack ind ce certificate 0080.EXP.10.0002
Summary Summary AQ1798_BOM_AND_CLOSURE_INSTRUCTIONS_50.pdf
AQ1798_BOM_AND_CLOSURE_INSTRUCTIONS_50.pdf
Summary Summary 101366678 closing instructions.xls
101366678-closing-instructions
Summary Summary HNS OPEN FACED CHARGES
CE CERTIFICATE ENB_B_040 HNS OPEN FACED CHARGES
Summary Summary 101702911-Closing-Instructions
101702911-Closing-Instructions
Summary Summary HNS Mild Detonating Fuze Assemblies
Detonating cord.
Summary Summary HMX (LX-tO) Cartridges
High (Blasting) explosive.
Summary Summary 0080_EXP_05_0047
CE CERTIFICATE 0080_EXP_05_0047
Summary Summary 100005319J_closing_Inst
100005319J_closing_Inst
Summary Summary ENB_B_128 -Time Delay Firing Head Assemblies
ENB_B_128 -Time Delay Firing Head Assemblies
Summary Summary PRESSED PELLETS OF HMX
PRESSED PELLETS OF HMX
Summary Summary Charge Casing & Drill Pipe Cutters-HMX
High (Blasting) explosive.
Summary Summary ENB_P_081 IGNITERS AND POWER CHARGES Bakers Oil Tools
ENB_P_081 IGNITERS AND POWER CHARGES| Bakers Oil Tools
Summary Summary ENB/B/041 HNS CARTRIDGES
ENB/B/041 HNS CARTRIDGES
Summary Summary CLOSING-INSTRUCTION-FOR-101711688
CLOSING-INSTRUCTION-FOR-101711688
Summary Summary +CA0952 Jet Research Center
package testing +CA0952 Jet Research Center
Summary Summary 102054947C-closing-instructions
102054947C-closing-instructions
Summary Summary Perfacord 80 HMX LS XHV
Detonating cord.
Summary Summary Non-Electric Detonators-HMX
CE CERTIFICATE ENB/D/048 for Detonator. NON ELECTRIC DETONATORS| HMX
Summary Summary HMX Booster Rods
High (Blasting) explosive.
Summary Summary ENB/B/023 PRESSED PELLETS OF HNS
ENB/B/023 PRESSED PELLETS OF HNS
Summary Summary DynaEnergetics Octocord PT165
DynaEnergetics Octocord PT165 0080_EXP_98_0017
Summary Summary CE MARK ENB-B-212
CE MARK ENB-B-212
Summary Summary CLOSING INSTRUCTION FOR SEGMENTED CUTTERS
CLOSING INSTRUCTION FOR SEGMENTED CUTTERS
Summary Summary Non-Electric Detonators and Boosters-HNX
Detonator.
Summary Summary CE MARK 0080-EXP-12-0015
CE MARK 0080-EXP-12-0015
Summary Summary Dyno Nobe